Image IMTL39606.2 user manual Assembly, Tighten the Upright Bolts yet

ASSEMBLY

To hire an authorized service technician to assemble the treadmill, call toll-free 1-800-445-2480. Assembly requires two persons. Set the treadmill in a cleared area and remove the packing materials; do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, lubricant may be transferred to the top of the walking belt or to the shipping carton. This is a normal condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, wipe it off with a soft cloth and mild, non-abrasive cleaner.

Assembly requires the included hex keys		and your own phillips screwdriver		, rubber
mallet	, adjustable wrench	, and wire cutters	.

To identify assembly hardware, see the drawings below. The number in parentheses below each drawing is the key number of the part, from the PART LIST in the center of the manual. The number following the parentheses is the quantity used in assembly. To avoid damaging plastic parts, do not use power tools for assembly.

Handrail Bolt (20)–4

3/4" Screw (2)–6

Wheel Spacer	1/4" Star Washer
(44)–4
	(21)–2

Upright Bolt/Wheel Bolt (27)–6

Silver Ground Screw (87)–2

Frame Washer

(33)–2

Handrail Star

Washer (19)–4

Frame Bolt (32)–2

Console

Bolt (22)–2

	Upright Star
Nut (47)–4	Washer (39)–4

1. Orient the Base (48) as shown.	1
Identify the Right Upright (36), which has a
square hole near the lower end.
Orient the Right Upright (36) as shown, and	36
attach it to the Base (48) with two Upright Bolts
(27) and two Upright Star Washers (39); do not
tighten the Upright Bolts yet.
	48
	Square	39
	Hole	27
		39
		27
	6