2. Have a second person orient the Base (48) as | 2 |
| |
shown. |
| ||
|
| ||
Identify the Left Upright (31), which has a large |
|
| |
hole near the bend as shown. | Bend |
| |
Orient the Left Upright (31) as shown, and attach |
| 31 | |
|
| ||
it to the Base (48) with two Upright Bolts (27) and |
| 39 | |
two Upright Star Washers (39); do not tighten |
| 27 | |
the Upright Bolts yet. |
| 48 | |
| Large Hole | ||
| 39 | ||
|
| ||
|
| 27 | |
3. Orient the Right Upright (36) as shown, and at- | 3 |
| |
tach it to the Base (48) with two Upright Bolts |
| ||
|
| ||
(27) and two Upright Star Washers (39); do not |
|
| |
tighten the Upright Bolts yet. |
|
| |
| Bend | 48 | |
|
| ||
|
| 39 | |
|
| 36 | |
|
| 27 | |
|
| 39 | |
4. Set the Base (48) near the front of the treadmill, | 4 | 36 | |
with the Power Cord (13) on the Hood (1) as | |||
| |||
shown. |
|
| |
Cut the small tie (not shown) holding the Upright | 13 | 36 | |
| Strap | ||
Wire (28) in a bundle. |
|
| |
Wrap the strap around the Upright Wire (28) and |
| 28 | |
secure the strap using the included plastic tie. |
| Tie | |
Then, pull the opposite end of the strap until the |
| ||
|
| ||
end of the Upright Wire is pulled through the |
|
| |
Right Upright (36). |
|
| |
|
| 28 | |
|
| 48 | |
| 7 |
|
