ASSEMBLY:

STEP 1:

Attach the FRONT STABILIZER (#2) to the MAIN FRAME (#1). Securely tighten with two

CARRIAGE BOLTS, WASHERS AND NUTS

(B).

Attach the REAR STABILIZER (#3) to the MAIN FRAME (#1). Securely tighten with two

CARRIAGE BOLTS, WASHERS AND NUTS

(B).

STEP 2:

Insert the COMPUTER WIRE (#4) & SENSOR WIRE (#14) through the COMPUTER POST (#7).

Note: The white socket of the wire must remain on the top (RIGHT) of the POST.

STEP 3:

Connect the COMPUTER WIRE (#7) & SENSOR WIRE (#14) with the wires from the MAIN FRAME (#1).

5

Page 6
Image 6
Impex GB-3006AP manual Assembly, Step