![](/images/new-backgrounds/1183249/18324913x1.webp)
ASSEMBLY INSTRUCTION
Tools Required For Assembling the Machine: Two Adjustable Wrenches and Allen
Wrenches. NOTE: It is strongly recommended for two or more people to assemble this machine to avoid possible injury.
STEP 1 (See Diagram 1)
A.) Attach one Base Frame (#3) to the Rear Base Frame (#2). Attach an Upright Beam (#1)
onto the Base Frame and Rear Base Frame. Secure them together with two M10 x 3 5/8” Carriage Bolts (#32), one 5 ½” x 2” Bracket (#15), two Ø ¾” Washer (#41), and two M10 Aircraft Nuts (#44) from bottom. Secure with two M10 x 2 ¾” Carriage Bolts (#33), two Ø ¾” Washer (#41), and two M10 Aircraft Nuts (#44) from side. Do not tighten the Nuts and Bolts yet. Repeat the same procedure to install the other side.
B.) Securely tighten all Nuts and Bolts.
C.) Insert two Crutches (#4) into the two Upright Beams. Insert two M18 Lock Knobs (#19) through the selected holes to obtain desired height.
DIAGRAM 1
6