STEP 5 (See Diagram 5)

A.)

Attach the Rear Vertical Frame (#6) onto the Rear Base (#16). Secure it with two M10 x 2

 

¾” Carriage Bolts (#85) from the bottom, two ¾” Washers (#80) and two M10 Aircraft

 

Nuts (#82) on the top. Slide the Sliding Weight Post (#11) onto the Rear Vertical Frame

 

from the top.

B.)

Place the Rear Base (#16) in between the two Rear Left & Right Stabilizers (#7 & #8).

 

Attach the Front Vertical Frame (#9) onto the Rear Base (#16). Align the holes and secure

 

them all together with two M10 x 3 1/8” Carriage Bolts (#88), ¾” Washers (#80), and

 

M10 Aircraft Nuts (#82).

C.)

Slide the Sliding Pulley Bracket (#17) onto the Front Vertical Frame (#9). Use a Lock Knob

 

(#68) to lock the Sliding Pulley Bracket at selected position.

D.)

Secure the Front Vertical Frame (#9) to the Rear Cross Brace (#5) with two M10 x 2 ¾”

 

Carriage Bolts (#85), one 4 ¾” Bracket (#27), two ¾” Washers (#80), and two M10

 

Aircraft Nuts (#82).

E.)

Attach the Upper Frame (#10) to the top of Front Vertical Frame (#9). Secure it with two

 

M10 x 5/8” Allen Bolts (#98) and ¾” Washers (#80).

F.)

Attach the rear of Upper Frame to the top of Rear Vertical Frame (#6). Secure it with one

 

M10 x 2 3/8” Allen Bolt (#95), ¾” Washer (#80) and 3 1/8” Bracket (#28) to the top hole.

 

Secure the bottom hole with one M10 x 2 ½” Carriage Bolt (#84), ¾” Washer (#80), and

 

M10 Aircraft Nut (#82).

G.)

Securely tighten all Nuts and Bolts previously installed.

12

Page 13
Image 13
Impex Olympic Cage manual From the top