STEP 2 (See Diagram 2)
A.) Note: In able to hold the Handlebar Post (#4) while connecting the cables and wires, extra help may be needed.
B.) Attach the Handlebar Post (#4) to the Main Frame (#1). Connect the Middle Computer Sensor Wire (#21) from the bottom of Handlebar Post to the Lower Computer Sensor Wire (#22) from the main body of the bike.
C.) Slide the cable wire from the Upper Tension Connector (#20) in between the opening on the wire holder on the Lower Tension Connector (#23). Pull the Upper Tension Connector upward and slide the wire through the slot on the bracket.
D.) Drop down the Connector so the fitting sits firmly on top of the bracket.
E.) Secure the Handlebar Post (#4) to the Main Frame (#1) with three M8 x 5/8” Allen Bolts (#18) and Ø 7/8” Bent Washers (#19).
F.) Connect Middle Computer Sensor Wire (#21) to Upper Computer Sensor Wire (#24). G.) Slide the Computer (#6) onto the plate on the Handlebar Post.
6
