ASSEMBLY INSTRUCTION
NOTE: It is strongly recommended two or more people assembling this machine to avoid possible injury.
STEP 1 (See Diagram1)
A.) Attach the Rear Stabilizer (#3) to the Main Frame (#1). Secure it with two M10 x 3” Carriage Bolts (#15), ∅ 1” Bent Washers (#16), and M10 Acorn Nuts (#17).
B.) Attach the Front Stabilizer (#2) to the Main Frame. Secure it with two M10 x 2 3/8” Carriage Bolts (#31), ∅ 1” Bent Washers (#16), and M10 Acorn Nuts (#17).
C.) Plug the Roller Caps (#28) onto both ends of Front Stabilizer (#2). Plug the Rear Stabilizer End Caps (#29) onto both ends of Rear Stabilizer (#3). Set the bike firmly on a flat surface. If the surface is uneven, rotate the Rear Stabilizer End Caps to level the bike.
DIAGRAM 1
5
