Supplied Hardware: (Full Size)
Cam - H | Cam Pin - I | Plastic Dowel - J |
Qty. 4 | Qty. 4 | Qty. 4 |
Machine Screw - K | Wood Screw - L | Shelf Pin - M |
Qty. 4 | Qty. 4 | Qty. 56 |
Step 1 - Attach Feet to NFCD Base
Insert a Machine Screw (K) into each Foot (C); then using the regular screwdriver, attach the Feet to the NFCD Base (B).
Diagram 1
B
C 
CC
K 
C K
KK
Step 2 - Insert Cam Pins into Side Panels
There are two holes that are centered on each side of the Side Panels (E), and 12” [304.3 mm] from each end. Using the phillips screwdriver, screw Cam Pins (I) into the two holes of each Side Panel taking care not to over tighten the Cam
Pins.
Diagram 2
E
E
I
