SAVE THESE INSTRUCTIONS. |
|
Impex Fitness Products | Phone: |
14777 Don Julian Road | Fax: (626) |
City Of Industry, CA 91746 | Email: |
ASSEMBLY INSTRUCTION
Turn the Jumping Surface (#1) over. There are plastic caps covering the threaded connector where the Legs will mount on.
Remove these caps and discard.
Insert the Leg (#2) through the sleeve on the Handrail Support (#3), and then firmly thread the Leg onto the threaded connector.
Skip the next open connector and repeat same procedure to mount the other Balance Bar Support and Leg onto the 3rd open threaded connector.
Firmly thread the other six Legs (#2) onto the remaining six open threaded connectors.
