ASSEMBLY INSTRUCTION
Tools Required Assembling the Machine: Two Adjustable Wrenches and Allen
Wrenches. NOTE: It is strongly recommended two or more people assembling this machine to avoid possible injury.
STEP 1 (See Diagram 1)
A.) | Connect the Left & Right Upright Beams (#1 & #2) by a Cross Brace (#4) in the mid- |
| span. Align the holes and secure each end with two M10 x 4 ¾” Carriage Bolts (#33), |
| one 5 ½” x 1 ¾” Bent Bracket (#13), two ∅ ¾” Washers (#42), and two M10 Aircraft |
| Nuts (#45). |
B.) | Insert two Crutches (#6) into the top openings on the Upright Beams. Secure them with |
| two Lock Knobs (#26) through selected holes to obtain desired height of the Supports. |
C.) | Place the Backrest Adjustment Bar (#5) onto the selected slot on Upright Beams. |
D.) | Attach the Weight Post (#11) to each Upright Beam. Secure it with one M10 x 1” Allen |
| Bolt (#36) and ∅ ¾” Washer (#42). Attach one Olympic Sleeve (#25) to each Post. |
| Attach a Spring Clip (#22) to each Sleeve. |
5
