STEP 4 (See Diagram 4)
A.) | Slide the Weight Holder (#2) onto the Rear Vertical Beam (#1) from the top. |
B.) | Attach the rear end of Upper Frame (#4) to the Rear Upper Vertical Beam (#1). Secure the |
| upper hole with a Small Bracket (#20), M10 x 2 3/8” Allen Bolt (#46), and ∅ ¾” Washer |
| (#53). Sure the bottom hole with a M10 x 2 3/8” Carriage Bolt (#43), ∅ 3/4” Washer (#53) |
| and M10 Aircraft Nut (#55). |
C.) | Place the Upper Frame (#4) on top of the Front Upper Vertical Beam (#5). Align the holes |
| and secure it with one Bracket (#21), two M10 x 2 ½” Carriage Bolts (#42), two ∅ ¾” |
| Washers (#53), and two M10 Aircraft Nuts (#55). |
D.) | Slide two Olympic Sleeves (#69) onto the Weight Holder (#2). Attach two Spring Clips (#65) |
| to the Olympic Sleeves. |
| DIAGRAM 4 |
7
