STEP 5 (See Diagram 5)

A.) Attach the Front Press Base (#12) to the Upper Frame (#4). Secure it with one 5 7/8” Axle (#60), two 1” Axle Washers (#64), and two M10 Aircraft Nuts (#55). Do not over tighten the nuts. Make sure the Base is able to swivel.

B.) Attach the Front Press Stopper (#8) and Butterfly Pulley Frame (#9) to the Front Upper Vertical Beam (#5). Align the holes and secure them together with two M10 x 2 ½” Carriage Bolts (#42), ¾” Washers (#53) and M10 Aircraft Nuts (#55).

C.) Insert the Lock Pin (#80) into the hole on the Front Press Stopper (#8) to lock the Base in place. Note: Remove the Pin when doing Front Press exercise. Lock the pin when doing Butterfly exercise.

DIAGRAM 5

8

Page 9
Image 9
Impex WM 1403 manual Diagram