Indesit BAN 134 NF, BAN 144 NF S manual Troubleshooting, The internal light does not illuminate

Models: BAN 144 NF BAN 134 NF BAN 134 NF G BAN 12 NF S BAN 12 NF BAN 144 NF S

1 12
Download 12 pages 59.09 Kb
Page 10
Image 10
Troubleshooting

Troubleshooting

GB

If the appliance does not work, before calling for Assistance (see Assistance), check for a solution from the following list.

 

Malfunctions:

The internal light does not illuminate.

The motor does not start.

The refrigerator and the freezer do not cool well.

The food inside the refrigerator is beginning to freeze.

The motor runs continuously.

The appliance makes a lot of noise.

Some of the external parts of the refrigerator become hot

Possible causes / Solutions:

The plug has not been inserted into the electrical socket, or not far enough to make contact, or there is no power in the house.

The appliance comes with a motor protection control (see Start-up and use).

The doors do not close properly or the seals are damaged.

The doors are opened too frequently.

The TEMPERATURE ADJUSTMENT knob is not in the correct position

The refrigerator or the freezer have been over-filled.

The TEMPERATURE ADJUSTMENT knob is not in the correct position.

The door is not closed properly or is continuously opened.

The outside ambient temperature is very high.

The appliance has not been installed on a level surface (see Installation).

The appliance has been installed between cabinets that vibrate and make noise.

The internal refrigerant makes a slight noise even when the compressor is off. This is not a defect, it is normal.

These raised temperatures are necessary in order to avoid the formation of condensation on certain parts of the product.

10

Page 10
Image 10
Indesit BAN 134 NF, BAN 144 NF S manual Troubleshooting, The internal light does not illuminate, The motor does not start