Start-up and use
GB
Starting the appliance
!Before starting the appliance, follow the installation instructions (see Installation).
!Before connecting the appliance, clean the compartments and accessories well with lukewarm water and bicarbonate.
!The appliance comes with a motor protection control system which makes the compressor start approximately 8 minutes after being switched on. The compressor also starts each time the power supply is cut off whether voluntarily or involuntarily (blackout).
1.Insert the plug into the socket and ensure that the
internal light illuminates ( the FREEZER OPERATION knob must not be on the • position) .
2.Turn the FREEZER OPERATION knob and REFRIGERATOR OPERATION knob to an average value. After a few hours you will be able to put food in the refrigerator.
Setting the temperature
The temperature inside the refrigerator compartment automatically adjusts itself according to the position of the thermostat knob. min= warmest
max = coldest
We recommend, however, a medium position.
Chiller system
No Frost
It is recognisable by
aeration cells located on
the back walls of the compartments.
The No Frost system circulates cold air
continuously to collect humidity and prevent ice
and frost formation. The system maintains an optimal humidity level in the compartment,
preserving the original quality of the food, preventing the food from sticking together and making defrosting a thing of the past. Do not block the aeration cells by placing food or containers in direct contact with the refrigerating back panel. Close bottles and wrap food tightly.
Using the refrigerator to its full potential
•Place only cold or lukewarm foods in the compartment, not hot foods (see Precautions and tips).
•Remember that cooked foods do not last longer than raw foods.
•Do not store liquids in open containers. They will increase humidity in the refrigerator and cause condensation to form.
6