RCA RT2770 quick start Connecting to Audio Components, Front panel controls, Mounting the Speakers

RT2770 QSG EN 6/3/07 5:19 PM Page 4

2. Positioning the Speakers

Left Rear Speaker
(Surround)		Left Front
3		Speaker
		1
		2
		Center
		1
3	4	Right Front
Right Rear Speaker	Subwoofer	Speaker
(Surround)

Courtesy Dolby Laboratories

1. Center: In surround mode, the center speaker carries most of the

dialog as well as music and effects. It should be set between the left

and right speakers.

2. Front Speakers: Front speakers carry primarily music and

sound effects.

3. Rear Speakers: The rear speakers’ overall sound balance should be as

close as possible to the front speakers. Proper placement is vital to

establish an evenly distributed sound field.

4. Subwoofer: A subwoofer is designed to reproduce powerful low bass

effects (explosions, the rumble of spaceships, etc.) which dramatically

34

Rear

Speaker

Front

Speaker

Rubber

Feet

Adjusting the Angle of the Speakers

To achieve the best Front Surround sound Effect (FSsE), adjust the mounted front left and the rear left speakers to the left for an angle of 25o - 45o from the center.

Adjust the mounted front right and rear right speakers to the right in the same way.

Rear

Speaker

Rear

Speaker

4. Connecting to Audio Components

COAXIAL OPTICAL

DVD/SAT/CAB

Digital Input

Connect components capable of outputting Dolby digital (e.g. DVD or SAT) or standard PCM (CD) format digital signals. Read section on "Input Signal Setting" under "Advanced Sound Control" carefully to adjust the matching input settings.

•The jacks on the back of the unit are used to connect to other components. One optical and one coaxial digital input jacks are provided for connection.

•To connect a SAT receiver or a DVD player with a digital output, use an optical digital cable (not included) or a coaxial digital cable (included) to carry the audio signal and enjoy Dolby Digital sound quality.

General controls

Front panel controls

heighten the action on the screen.

3. Front Surround sound Effect(FSsE) Setting (Optional)

Front Surround sound Effect(FSsE) Setting

If placing the rear speakers (surround speakers) at the back is not a good choice for you, you can use the Front Surround sound Effect(FSsE). Follow the following instruction for setting the speakers.

25	o
	- 45o	25		-			Front
	Front		o		45
	Speaker					o	Speaker

Center

1

2

3

4

11

10

Mounting the Speakers

1.Match the front left and rear left speakers together and match the front right and rear right speakers together. Place the front speaker upside down.

2.Slide in the hinge to the bottom of the front speaker until the ‘click’ sound is heard.

3.Slide in the rear speaker to the hinge until the ‘click’ sound is heard.

4.Attach the four rubber feet provided to the top of the front speaker.

12

Hinge

Bottom

Front

Speaker

Top

Place the rear speakers and subwoofer a foot or more away from TV. After adjusting the angle, the speaker should look like this illustration.

5 6 7 8

1. ON/STANDBY

Turns on/off the unit. When the unit is turned on, the unit will go to the mode it was in before powered off.

2.

Starts and pauses playback in USB mode.

3.

Stops playback in USB mode.

4. / (PRESET buttons)

Selects preset stations in AM/FM mode. Directly accesses the previous or next track in USB mode.

5. USB jack

Connects USB devices.

6. LINE IN

Connects components for audio input.

9

7. / (SURROUND buttons) Selects digital sound processor.

(STEREO, HALL, CHURCH, CLUB, STADIUM, STUDIO, 3 STEREO, DOLBY PL EMULATION, DOLBY PL II MUSIC, DOLBY PL II MOVIE)

8.DVD/DVR, TV, SAT.CAB, AM/FM, VCR, USB and LINE-IN (SOURCE buttons)

Selects sound source.

9. Headphones jack

10.MASTER VOLUME Adjusts the volume.

11.SUBWOOFER

Selects among subwoofer output levels. (SOFT SUBWOOFER, BALANCE SUBWOOFER, STRONG SUBWOOFER, POWERFUL SUBWOOFER)