Installation

Positioning the Appliance

Position the appliance in the desired location. The back should rest against the wall behind it, and the sides, along the adjacent cabinets or wall. The dishwasher is equipped with water supply and drain hoses that can be positioned to the right or the left to facilitate proper installation.

Levelling the Appliance

Once the appliance is positioned, adjust the feet (screwing them in or out) to adjust the height of the dishwasher, making it level. In any case, the appliance should not be inclined more than 2°.

If the appliance is level, it will help ensure proper perfor- mance.

Cold Water Connection

 

Connect the cold water supply

 

hose to a threaded 3/4 (gas)

 

connector, inserting the small

 

filter supplied with the

 

dishwasher and making sure

A

that it is fastened tightly in place

 

(see figure 2).

 

If the water pipes are new or

Fig.2

have not been used for an

 

extended period of time, let the

 

water run to make sure that the water is clear and free of impurities. If this precaution is not taken, there is a risk that the water inlet can get blocked and damage the appliance.

Hot Water Connection

The water supply to the appliance can also be connected to the house's hot water line (centralised system, heating system), as long as it does not exceed a temperature of 60° C.

In this case, the wash cycle time will be shortened by about 15 minutes and the wash efficiency slightly reduced.

The connection must be made to the hot water line following the same procedures as those for the connection to the cold water line.

Drain Hose Connection Insert the drain hose into a drain pipe with a minimum diameter of 4 cm., or let it run into the sink, making sure to avoid bending or crimping it. Use the speical plastic support that comes with the appliance (see figure to the right). The free end of the hose must be at a height between 40 and 100 cm and must not be immersed in water.

Attention: The special plastic hose support must be solidly fastened to the wall to prevent the drain hose from moving and allowing water to spill outside the drain.

Electrical Connection

After making sure that the voltage and frequency values for the current in the home correspond to those on the rating plate (located on the stainless steel inner door of the appliance) and that the electrical system is sized for the maximum voltage on the rating plate, insert the plug into an electrical socket which is earthed properly (the earthing of the appliance is a safety requirement mandated by law). If the electrical socket to which the appliance must be connected is not appropriate for the plug, replace the plug, rather than using adpators or the like as they could cause overheating and burns.

Caution: the dishwasher plug must be accessible even when the appliance is installed as a built-in unit so that maintenance can be done safely.

Should the electricity supply cable be damaged, we recommend that you only contact authorised Technical Service Centres for the replacement.

9

GB

Page 10 Page 12
Page 11
Image 11
Indesit DI 62 manual Installation
Page 10 Page 12

DI 62 specifications

The Indesit DI 62 is an under-counter dishwasher that combines efficiency and practicality, making it a popular choice for many households. This appliance has been designed to fit seamlessly into your kitchen while offering a range of features that cater to the needs of busy families and individuals alike.

One of the standout characteristics of the Indesit DI 62 is its energy efficiency. It boasts an A+ energy rating, which not only helps reduce your household energy bills but also minimizes its environmental impact. This model also consumes less water than traditional washing methods, making it an eco-conscious choice.

The dishwasher offers a generous capacity, accommodating up to 12 place settings, making it suitable for medium to large households. The interior is designed with adjustable racks and folding tines, allowing for versatile loading options. This flexibility ensures that you can fit in larger items like pots and pans without compromising on space.

In terms of cleaning performance, the Indesit DI 62 is equipped with multiple wash programs to handle a variety of cleaning needs. The intensive cycle is particularly effective for heavily soiled dishes, while the quick wash option is ideal for when you need clean dishes in a hurry. Additionally, the eco wash program is designed to offer a thorough clean while using minimal water and energy.

Another noteworthy feature is the noise level of the Indesit DI 62. Operating at a quiet 49 dB, it allows you to run cycles at any time of the day without causing disruption, making it perfect for open-plan living spaces.

The dishwasher is also built with user-friendliness in mind. Its simple control panel with indicator lights makes it easy for anyone to operate. Moreover, the delayed start function allows you to plan your washing cycles according to your schedule, further enhancing convenience.

Safety is also a priority with features such as an overflow protection system, ensuring that you can use the appliance with peace of mind.

In conclusion, the Indesit DI 62 under-counter dishwasher stands out with its combination of energy efficiency, spacious design, versatile wash programs, and user-centric features. It represents a solid investment for anyone looking to streamline their dishwashing routine while maintaining high cleaning standards.
Top Page Image Contents