Care and maintenance

Shutting off the water and electricity
supplies
•	Turn off the water tap after every wash cycle to avoid
	leaks.
•	Always unplug the appliance when cleaning it and
	when performing maintenance work.
Cleaning the dishwasher
•	The external surfaces of the machine and the control
	panel may be cleaned using a non-abrasive cloth
	which has been dampened with water. Do not use
	solvents or abrasive products.
•	Any marks on the inside of the appliance may be
	removed using a cloth dampened with water and a
	little vinegar.
Preventing unpleasant odours
•	Always keep the door of the appliance ajar in order to
	avoid moisture from forming and being trapped inside
	the machine.
•	Clean the seals around the door and detergent
	dispensers regularly using a damp sponge. This will
	avoid food becoming trapped in the seals, which is
	the main cause behind the formation of unpleasant
	odours.

Clean the water inlet filter at the tap outlet regularly.

-Turn off the water tap.

-Unscrew the end of the water inlet hose, remove the filter and clean it carefully under running water.

-Replace the filter and screw the water hose back into position.

Cleaning the filters

The filter assembly consists of three filters which remove food residues from the washing water and then recirculate the water. They should be cleaned if you wish to achieve the best results in every wash.

Clean the filters regularly.

The dishwasher should not be used without filters, or if the filter is loose.

•After several washes, check the filter assembly and if necessary clean it thoroughly under running water, using a non-metallic brush and following the instructions below:

1. Turn the cylindrical filter C in an anti-clockwise direction and pull it out (fig. 1).

2. Remove the cup filter B by exerting a slight pressure on the side flaps (fig. 2).

3. Slide out the stainless steel plate filter A (fig. 3).

4. Inspect the trap and remove any food residue. NEVER REMOVE the wash cycle pump (black detail) (fig. 4).

Cleaning the sprayer arms
Food residue may become encrusted onto the sprayer
arms and block the holes used to spray the water. It is		B
therefore recommended that the arms are checked from	C	B
therefore recommended that the arms are checked from

time to time and cleaned with a small non-metallic
brush.	1	C
brush.		2
The two sprayer arms may both be removed.


To remove the upper sprayer
arm, rotate the locking ring in
an anti-clockwise direction.
The upper sprayer arm should	A
be replaced with the holes	A
be replaced with the holes
facing upwards.
The lower sprayer arm can be	3	4
The lower sprayer arm can be
removed by pressing on the	After cleaning the filters, replace the filter assembly and fix it in
side tabs and pulling it
side tabs and pulling it	position correctly; this is essential for maintaining the efficient
upwards.
upwards.	operation of the dishwasher.
	operation of the dishwasher.

Leaving the machine unused for extended periods

Cleaning the water inlet filter* If the water hoses are new or have not been used for an extended period of time, let the water run to make sure it is clear and free of impurities before performing the necessary connections. If this precaution is not taken, the water inlet could become blocked and damage the dishwasher.

•Disconnect the appliance from the electricity supply and shut off the water tap.

•Leave the door of the appliance ajar.

•When you return, run a wash cycle when the dishwasher is empty.

* Only available in selected models.

DIF 04, DIF 16 specifications

Indesit is well-known for producing high-quality kitchen appliances, and their dishwashers, particularly the Indesit DIF 16 and DIF 04 models, exemplify this commitment to efficiency and convenience. These built-in dishwashers are designed to blend seamlessly into your kitchen, offering a combination of practicality and modern technology.

The Indesit DIF 16 is distinguished by its spacious design, capable of accommodating up to 13 place settings. This makes it perfect for families or those who entertain frequently. Its energy efficiency is commendable, achieving an energy rating of A+. This not only helps to reduce environmental impact but also ensures lower energy bills. Consumers will appreciate the four wash programs, including rapid and eco modes, which provide flexibility to tackle different levels of soiling efficiently.

On the other hand, the DIF 04 model focuses on simplicity and user-friendliness. With a slightly more compact design yet still offering room for up to 10 place settings, it is an ideal choice for smaller households or kitchen spaces with limited room. One of its standout features is the adjustable upper rack, which allows users to create extra space for taller items, ensuring optimal loading convenience without sacrificing performance.

Both models employ advanced technology, such as the innovative water spray system that maximizes cleaning power by reaching every corner of the dishwasher. The use of smart sensors helps in optimizing water and energy usage for each cycle, enhancing the efficiency of every wash. Additionally, they come equipped with a delay start feature, granting users flexibility to run the dishwasher during off-peak hours for added savings.

Moreover, the Indesit DIF 16 and DIF 04 are designed with noise reduction technologies, making them quieter than many competitors, a significant consideration for kitchens that serve as social spaces. The sleek, modern appearance of both dishwashers is complemented by intuitive controls, making them accessible to users of all experience levels.

In conclusion, the Indesit DIF 16 and DIF 04 dishwashers stand out for their combination of practicality, efficiency, and user-friendly features. They represent an excellent choice for anyone looking to improve their kitchen's functionality while maintaining a commitment to sustainability and energy conservation. With their thoughtful designs and reliable performance, these dishwashers are smart additions to any home.

Indesit DIF 16, DIF 04 manual Care and maintenance

Models: DIF 04 DIF 16