Connecting the water outlet hose

Connect the outlet hose (without bending it) to a drain duct with a minimum diameter of 4 cm. Alternatively, rest it over a sink or tub; the free end of the hose should not remain immersed in water.

Anti-condensation strip*

After installing the dishwasher, open the door and stick

EN

 

the adhesive transparent strip under the wooden shelf in

 

order to protect it from any condensation which may

 

form.

 

Advice regarding the first wash cycle

A

(see figure).

The special plastic elbow* makes it easier to find the best layout: fix the elbow to the wall securely in order to prevent the outlet hose from moving and spilling the dirty water.

The part of the hose marked with the letter A should be between 40 and 100 cm above the ground

After the appliance has been installed, immediately before running the first wash cycle, completely fill the salt dispenser with water and add only then approximately 1 kg of salt (see chapter entitled Rinse aid and refined salt). The water may overflow: this is normal and is not a cause for concern. Select the water hardness value (see chapter entitled Rinse aid and refined salt). - After the salt has been poured into the machine, the LOW SALT indicator light* switches off.

If the salt container is not filled, the water softener and the heating element may be damaged as a result.

We advise against the use of hose extensions.

Electrical connection

Before inserting the plug into the electrical socket, make sure that:

The socket is earthed and complies with current regulations.

The socket can withstand the maximum load of the appliance, which is indicated on the data plate located on the inside of the door (see chapter entitled Description of the appliance).

The power supply voltage falls within the values indicated on the data plate on the inside of the door.

The socket is compatible with the plug of the appliance. If this is not the case, ask an authorised technician to replace the plug (see Assistance); do not use extension cables or multiple sockets.

Once the appliance has been installed, the power supply cable and the electrical socket should be easily accessible.

The cable should not be bent or compressed.

If the power supply cable is damaged, it must be re- placed by the manufacturer or its Technical Assistance Service in order to prevent all potential hazards. (See As- sistance)

The Company shall not be held responsible for any incidents that occur if these regulations are not observed.

Technical data

 

 

Dimensions

width 59.5 cm

height 82 cm

 

depth 57 cm

Capacity

12 standard place-settings

 

 

Water supply

0,05 ÷ 1MPa (0.5 ÷ 10 bar)

pressure

4.3 psi – 145 psi

 

 

Power supply

See appliance data plate

voltage

 

 

 

Total absorbed

See appliance data plate

power

 

 

 

Fuse

See appliance data plate

 

 

 

This dishwasher conforms to

 

the following European

 

Community Directives:

 

-73/23/EEC dated 19/02/73

 

(Low Voltage) and

 

subsequent modifications

 

-89/336/EEC dated 03/05/89

 

(Electromagnetic

 

Compatibility)

 

and subsequent modifications

 

-97/17/EC (Labelling)

 

-2002/96/ CE (Waste

 

Electrical and Electronic

 

Equipment WEEE)

*Only available in selected models.

3

Page 3
Image 3
Indesit DIF 04, DIF 16 Advice regarding the first wash cycle, Connecting the water outlet hose, Anti-condensation strip

DIF 04, DIF 16 specifications

Indesit is well-known for producing high-quality kitchen appliances, and their dishwashers, particularly the Indesit DIF 16 and DIF 04 models, exemplify this commitment to efficiency and convenience. These built-in dishwashers are designed to blend seamlessly into your kitchen, offering a combination of practicality and modern technology.

The Indesit DIF 16 is distinguished by its spacious design, capable of accommodating up to 13 place settings. This makes it perfect for families or those who entertain frequently. Its energy efficiency is commendable, achieving an energy rating of A+. This not only helps to reduce environmental impact but also ensures lower energy bills. Consumers will appreciate the four wash programs, including rapid and eco modes, which provide flexibility to tackle different levels of soiling efficiently.

On the other hand, the DIF 04 model focuses on simplicity and user-friendliness. With a slightly more compact design yet still offering room for up to 10 place settings, it is an ideal choice for smaller households or kitchen spaces with limited room. One of its standout features is the adjustable upper rack, which allows users to create extra space for taller items, ensuring optimal loading convenience without sacrificing performance.

Both models employ advanced technology, such as the innovative water spray system that maximizes cleaning power by reaching every corner of the dishwasher. The use of smart sensors helps in optimizing water and energy usage for each cycle, enhancing the efficiency of every wash. Additionally, they come equipped with a delay start feature, granting users flexibility to run the dishwasher during off-peak hours for added savings.

Moreover, the Indesit DIF 16 and DIF 04 are designed with noise reduction technologies, making them quieter than many competitors, a significant consideration for kitchens that serve as social spaces. The sleek, modern appearance of both dishwashers is complemented by intuitive controls, making them accessible to users of all experience levels.

In conclusion, the Indesit DIF 16 and DIF 04 dishwashers stand out for their combination of practicality, efficiency, and user-friendly features. They represent an excellent choice for anyone looking to improve their kitchen's functionality while maintaining a commitment to sustainability and energy conservation. With their thoughtful designs and reliable performance, these dishwashers are smart additions to any home.