Installation

Electrical Requirements

For your own safety, we recommend that your cooker is installed by a competent person such as one who is registered with NICEIC (National Inspection Council for Electrical Installation Contracting). The cooker should be installed in accordance with the latest edition of the IEE Regulations.

Warning: This appliance must be earthed.

Electrical Connections

The installer must check that the voltage shown at the rating plate corresponds with the house electricity supply.

The cooker must be supplied via a suitable double pole isolating switch, having a contact separation of at least 3mm in all poles placed in a readily accessible position adjacent to the cooker.

If the cooker is to be wired into a connector unit, this may be positioned behind the cooker providing the following requirements are met:

i)The connector unit must not project from the wall more than 25mm.

ii)The top of the connector must not be more than 130mm above floor level.

Remove the terminal cover at the rear base of the cooker. Pass the cable through the cable clamp and connect to the appropriate terminals provided.

Allow sufficient cable for any future servicing.

Tighten the screws on the cable clamp and replace the cover.

Make main connections in the connector unit or cooker control unit.

This appliance conforms to B.S. EN 55014 regarding suppression of Radio and Television reception interference.

Adouble Pole control switch having a minimum rating of 32 amps should be used to feed the cooker using a suitably rated cable.

Where a hob is fitted adjacent to or over the cooker, a 45 amp Double Pole control switch should be used to feed both units via separate suitably rated cables.

We recommend a minimum of 4mm2 PVC insulated twin and earth cable conforming to B.S. 6004 for connection of each appliance.

In all cases adhere to routing details (see fig. 4).

This appliance must not be installed over any other appliance that generates heat such as a plinth heater

Note: Due to many different types of installation, a mains cable is not supplied with this product. The installer will fit the correct type and length of cable.

37

Page 37 Page 39
Page 38
Image 38
Indesit FIDM20 Installation, Electrical Requirements, Electrical Connections, All cases adhere to routing details see fig
Page 37 Page 39

FID20, FIDM20 specifications

The Indesit FIDM20 and FID20 models stand out as versatile and efficient appliances in the world of built-in dishwashers. They are designed to cater to the needs of modern households, combining user-friendly features with advanced technology to deliver exceptional cleaning performance.

One of the main features of the Indesit FIDM20 and FID20 is their impressive capacity. Both models can accommodate up to 13 place settings, allowing families to wash a substantial amount of dishes in one cycle. This is especially beneficial for larger households or those who enjoy entertaining guests. The adjustable racks and foldable plate holders further enhance versatility, enabling users to optimize space and easily fit in larger pots and pans when necessary.

Both models are equipped with a range of wash programs, including eco-friendly options that reduce water and energy consumption without compromising cleaning performance. The Eco Cycle is particularly notable for minimizing environmental impact while still providing thorough cleaning results. Additionally, the models come with a Fast Wash setting, allowing users to get clean dishes in as little as 30 minutes—perfect for busy days.

The Indesit FIDM20 comes with the added benefit of a built-in drying feature. The Advanced Drying Technology ensures that dishes come out dry and ready to be put away, reducing the need for towel drying and helping to eliminate water spots. Both models also operate quietly, with a noise level around 49 decibels, making them ideal for open-plan living spaces or for running late at night.

Another important characteristic is the simple control panel. The user-friendly interface allows for easy program selection and monitoring, making it straightforward to customize wash cycles based on specific needs. Additionally, the delay start function lets users program the dishwasher to start at a more convenient time, such as during off-peak energy hours.

In summary, the Indesit FIDM20 and FID20 dishwashers provide a perfect blend of capacity, efficiency, and ease of use. Their advanced washing technologies, eco-friendly capabilities, and quiet operation make them a strong addition to any kitchen, ensuring that dishwashing becomes a seamless part of daily routines while delivering sparkling clean results every time.
Top Page Image Contents