Installation

Positioning the Appliance

Position the appliance in the desired location. The back should rest against the wall behind it, and the sides, along the adjacent cabinets or wall. The dishwasher is equipped with water supply and drain hoses that can be positioned to the right or the left to facilitate proper installation.

Levelling the Appliance

Once the appliance is positioned, adjust the feet (screwing them in or out) to adjust the height of the dishwasher, making it level. In any case, the appliance should not be inclined more than 2°.

If the appliance is level, it will help ensure proper perfor- mance.

This dishwasher model can be built under a single worktop (please read the relevant instruction sheet).

Cold Water Connection

This electric household appliance should be connected to the water mains using the cold water supply hose provided with the appliance only. Do not use a different hose. In the event of replacements, use original spare parts only.

Connect the cold water supply hose to a threaded 3/4 (gas) connector and making sure that it is fastened tightly in place. If the water pipes are new or have not been used for an extended period of time, let the water run to make sure that the water is clear and free of impurities. If this precaution is not taken, there is a risk that the water inlet can get blocked and damage the appliance.

Hot Water Connection

The water supply to the appliance can also be connected to the house's hot water line (centralised system, heating system), as long as it does not exceed a temperature of 60° C.

In this case, the wash cycle time will be shortened by about 15 minutes and the wash efficiency slightly reduced.

The connection must be made to the hot water line following the same procedures as those for the connection to the cold water line.

Anti-flooding protection

Your dishwasher is provided with a special system which blocks the water supply in the event of leaks inside the appliance.

Drain Hose Connection
Fit the drain pipe into a drain
					A
line with a minimum diameter
of 4 cm or place it over the
sink. Avoid restricting or
bending it. Use the special
plastic elbow provided (see fi-
gure) to position it in the best

possible way. The part of the
pipe marked with the letter A
should be between 40 and 100

cm above the ground.
The pipe should not be immersed in water.

Attention: The special plastic hose support must be solidly fastened to the wall to prevent the drain hose from moving and allowing water to spill outside the drain.

Electrical Connection

After making sure that the voltage and frequency values for the current in the home correspond to those on the rating plate (located on the stainless steel inner door of the appliance) and that the electrical system is sized for the maximum voltage on the rating plate, insert the plug into an electrical socket which is earthed properly (the earthing of the appliance is a safety requirement mandated by law). If the electrical socket to which the appliance must be connected is not appropriate for the plug, replace the plug, rather than using adpators or the like as they could cause overheating and burns.

Should the electricity supply cable be damaged, we recommend that you only contact authorised Technical Service Centres for the replacement.

CAUTION:

The dishwasher plug must be accessible even when the appliance is installed as a built-in unit so that maintenance can be done safely.

IDL 730, IDL 735 specifications

The Indesit IDL 735 and IDL 730 are two highly efficient and practical built-in dishwashers designed to enhance your kitchen experience. With their modern design and advanced features, these models offer a perfect blend of functionality and style.

One of the standout features of both models is their excellent energy efficiency. With an A+ energy rating, they consume less energy compared to traditional models, helping to lower utility bills while being environmentally friendly. This efficiency does not compromise performance, as these dishwashers provide thorough cleaning with every cycle.

The IDL 735 and IDL 730 are equipped with multiple wash programs to cater to various needs. The Intensive program is ideal for heavily soiled pots and pans, while the Rapid option allows for a quick wash when you are short on time. The Eco mode is perfect for energy-conscious users, providing an efficient cleaning process while utilizing minimal resources.

With a spacious interior capable of accommodating up to 13 place settings, these dishwashers are suitable for both small and large households. The adjustable top basket is a significant feature that allows users to customize the interior layout according to their dishwasher load, ensuring that larger items fit seamlessly.

In addition to a user-friendly interface, these models boast a delay start option, allowing you to schedule the wash cycle at a more convenient time. This feature supports those with busy schedules, letting users take advantage of off-peak energy rates. The large viewing window also enables easy monitoring of the wash cycle without opening the door.

Both the IDL 735 and IDL 730 come with a host of advanced technologies that enhance the washing experience. The innovative Extra Hygiene feature ensures that your dishes are not only clean but also sanitized, making these models ideal for families with young children or individuals with allergies.

Moreover, their silent operation makes them perfect for open-plan living areas, ensuring you can enjoy a peaceful environment. The noise level during operation is impressively low, allowing you to run your dishwasher during any time of the day or night without disruption.

In summary, whether you opt for the Indesit IDL 735 or IDL 730, you're choosing a reliable, efficient, and modern dishwasher that makes washing dishes a breeze. With their thoughtful design and cutting-edge technologies, these models align perfectly with contemporary kitchen needs.

Indesit IDL 735, IDL 730 manual Installation

Models: IDL 730 IDL 735