Maintenance and care
Switching the appliance off
Disconnect your appliance from the electricity supply before carrying out any work on it.
Cleaning the appliance
Do not use abrasive or corrosive detergents such as stain removers,
Never use steam cleaners or pressure cleaners on the appliance.
•It is usually enough to wash the hob with a damp sponge and dry it with absorbent kitchen roll.
•The removable parts of the burners should be washed frequently with warm water and soap and any
•For hobs which ligth automatically, the terminal part of the electronic instant lighting devices should be cleaned frequently and the gas outlet holes should be checked for blockages.
•Stainless steel can be marked by hard water that has been left on the surface for a long time, or by aggressive detergents containing phosphorus.
After cleaning, rinse and dry any remaining drops of water.
The position of the central grid may be inverted. If
this happens, the spokes will appear particularly | GB |
misaligned and the intersection point will no longer |
|
be at the centre of the burner. There is a hole on the |
|
grids at the side; this should be aligned with the |
|
fixing point of the tab or hinge (if the glass cover is |
|
fitted) located on the rear part of the hob (see |
|
figure). |
|
KO !
OK
Gas tap maintenance
Over time, the taps may become jammed or difficult to turn. If this happens, the tap must be replaced.
This procedure must be performed by a qualified technician authorised by the manufacturer.
9
