Connecting the drain hose

• the supply voltage is included within the values i

65 - 100 cm

Connect the drain hose, without bending it, to a draining duct or a wall drain situated between 65 and 100 cm from the floor;

ndicated on the Technical details table

GB

 

(see page 5);

 

•the socket is compatible with the washing machine's plug. If this is not the case, replace the socket or the plug.

Your appliance is now supplied with a 13 amp fused plug it can be plugged into a 13 amp socket for immediate use. Before using the appliance please read the instructions below.

Where it connects to the waste water pipe cut end off spigot or remove the blanking cap

The drain hose may be connected to an under-sink trap. Before connecting the drain hose from the machine ensure that any blanks or removable ends have been taken off the spigot.

If it is place over the edge of a basin or sink be sure the free end of the hose should not be underwater.

WARNING - THIS APPLIANCE MUST BE EARTHED. THE FOLLOWING OPERATIONS SHOULD BE CARRIED OUT BY A QUALIFIED ELECTRICIAN.

Replacing the fuse:

When replacing a faulty fuse, a 13 amp ASTA approved fuse to BS 1362 should always be used, and the fuse cover re-fitted. If the fuse cover is lost, the plug must not be used until a replacement is obtained.

Replacement fuse covers:

If a replacement fuse cover is fitted, it must be of the correct colour as indicated by the coloured marking or the colour that is embossed in words on the base of the plug. Replacements can be obtained directly from your nearest Service Depot.

Removing the plug:

If your appliance has a non-rewireable moulded plug and you should wish to re-route the mains cable through partitions, units etc., please ensure that either:

￿We advise against the use of hose extensions; in case of absolute need, the extension must have the same diameter as the original hose and must not exceed 150 cm in length.

Ensure that if the drain hose is pushed into a standpipe, that the end does not go down more than 15cms (6 inches). If the hose is pushed down too far, this may cause the machine to self -syphon ie. continuously empty as it is filling.

Electric connection

Before plugging the appliance into the mains socket, make sure that:

•the socket is earthed and in compliance with the applicable law;

•the socket is able to sustain the appliance's maximum power load indicated in the Technical details table (see page 5);

the plug is replaced by a fused 13 ampere re- wearable plug bearing the BSI mark of approval. or:

the mains cable is wired directly into a 13 amp cable outlet, controlled by a switch, (in compliance with BS 5733) which is accessible without moving the appliance.

Disposing of the plug:

Ensure that before disposing of the plug itself, you make the pins unusable so that it cannot be accidentally inserted into a socket.

Instructions for connecting cable to an alternative plug: Important: the wires in the mains lead are coloured in accordance with the following code:

Green & Yellow Earth

BlueNeutral

Brown Live

3

Page 2 Page 4
Page 3
Image 3
Indesit IWC 8123 manual 65 100 cm
Page 2 Page 4

IWC 8123 specifications

The Indesit IWC 8123 is a high-quality, front-loading washing machine designed to offer efficiency and convenience for modern households. With its sleek design and user-friendly features, it has become a popular choice among consumers looking for a reliable appliance that can handle a range of laundry tasks.

One of the standout features of the Indesit IWC 8123 is its impressive capacity. With an 8 kg wash load, this model can accommodate larger laundry loads, making it ideal for busy families or those who regularly wash bulky items like towels and bedding. This capacity is complemented by a variety of wash programs, allowing users to select the perfect cycle for different fabric types and soil levels. From delicate silks to robust cottons, the IWC 8123 ensures optimal care for all fabrics.

Equipped with innovative technologies, the Indesit IWC 8123 incorporates a powerful motor that delivers efficient washing performance while keeping noise levels to a minimum. This is particularly beneficial for households where the washing machine is placed near living areas, as it ensures a quieter operation.

The washing machine also features the Energy Saver function, which intelligently adjusts the wash parameters to reduce energy consumption without compromising on performance. This is an essential feature for environmentally conscious consumers looking to lower their energy bills while still achieving excellent washing results.

Moreover, the IWC 8123's built-in sensors detect load size and adjust the water and energy use accordingly, ensuring users don't waste resources on smaller loads. This intelligent design contributes to its overall efficiency and sustainability.

Another noteworthy characteristic of the Indesit IWC 8123 is its user-friendly interface. The digital display and intuitive control panel make it easy for users to select their desired settings, monitor the cycle progress, and set delay timers for added convenience.

In summary, the Indesit IWC 8123 is an exemplary washing machine that blends capacity, efficient performance, and advanced technology. Its range of features ensures it meets the diverse needs of modern households while providing reliable service and energy savings. This makes it a smart addition to any home looking to elevate their laundry experience.
Top Page Image Contents