Personalisation

Setting the temperature

Turn the TEMPERATURE knob to set the wash temperature (see Table of wash cycles).

GB

 

The temperature may be lowered, or even set to a cold wash . The washer-dryer will automatically prevent you

 

from selecting a temperature which is higher than the maximum value set for each wash cycle.

 

Setting the drying cycle

Table of Drying times (guideline values)

 

 

 

 

 

 

Turn the DRYING knob to select the desired drying

 

 

 

 

 

 

Fabric

Load type

Max.

Cupboard

Hanger

Iron

option. There are two options:

type

 

load

dry

dry

dry

A - Based on time: From 40 minutes to 180.

 

 

 

(kg)

 

 

 

 

 

 

 

 

 

 

B - Based on the desired laundry dryness level:

 

 

 

 

 

 

Cotton

Clothing of different

 

 

 

 

Iron dry : suitable for clothes which will need ironing

5

180

170

140

 

sizes, Terry towels

afterwards. the remaining dampness softens creases,

 

 

 

 

 

 

 

 

 

 

 

Synthetics

Sheets, Shirts, Pyjamas,

 

 

 

 

making them easier to remove.

3

140

120

100

Hanger dry

: ideal for clothes which do not need to

 

socks, etc.

 

 

 

 

 

 

 

 

 

 

 

be dried fully.

Cupboard dry : suitable for laundry which can be put back in a cupboard without being ironed.

If your laundry load to be washed and dried is much greater than the maximum stated load (see adjacent table), perform the wash cycle, and when the cycle is complete, divide the garments into groups and put some of them back in the drum. At this point, follow the instructions provided for a "Drying only" cycle. Repeat this procedure for the remainder of the load.

Drying only

Use the cycle selector knob to select a drying cycle (11-12-13) in accordance with the type of fabric. The desired drying level or time may also be set using the DRYING knob.

Functions

The various wash functions available with this washer-dryer will help to achieve the desired results, every time. To activate the functions:

1.Press the button corresponding to the desired function;

2.the function is enabled when the corresponding indicator light is illuminated.

Note: If the indicator light flashes rapidly, this signals that this particular function may not be selected in conjunction with the selected wash cycle.

Selecting this option enables you to suitably adjust drum rotation, temperature and water to a reduced load of lightly

soiled cotton and synthetic fabrics (refer to the "Table of wash cycles"). “” enables you to wash in less time thereby saving water and electricity. We suggest using a liquid detergent suitably measured out to the load quantity.

￿This function may not be used in conjunction with wash cycles 1, 5, 6, 7, 8, 9, 10, 11, 12, 13, , , .

1200-600

Press this button to reduce the spin speed

￿This function may not be used in conjunction with wash cycles 6, 11, 12, 13, .

Intensive Wash

Because a greater quantity of water is used in the initial phase of the cycle, and because of the increased cycle duration, this function offers a high-performance wash.

￿This function may not be used in conjunction with wash cycles 5, 6, 7, 8, 9, 10, 11, 12, 13, , , .

Delay timer

This timer delays the start time of the wash cycle by up to 9 hours. Press the button repeatedly until the indicator light corresponding to the desired delay time switches on. The fifth time the button is pressed, the function will be disabled. N.B. Once the START/PAUSE button has been pressed, the delay time can only be modified by decreasing it until launching the set programme.

￿This option is enabled with all programmes.

9

Page 9
Image 9
Indesit IWDC 6125 manual Personalisation, Setting the temperature, Setting the drying cycle, Functions