Philips 20PT 91S manual Setting the Remote Control to Work with Other Devices

SETTING THE REMOTE CONTROL TO WORK WITH OTHER DEVICES
Direct Access Method
ow that you have looked up
Nthe three-digit Remote Code							2
Number for your brand of device,
you are ready to follow the four		1		SLEEP
simple steps below.
Please read through steps 1-4				A/CH	STATUS/EXIT	CC	CLOCK
								4
before beginning.			TV	RECORD			TV/VCR
BEGIN			VCR	1	2		3
Place the TV/VCR/ACC			ACC
			3	4	5		6
Mode Switch in the proper posi-
tion.				7	8		9
Press the VCR RECORD
				SOUND			PICTURE
button on the remote control and	VCR				0
release.
Press the AutoSound button				MENU			SURF
on the remote within 30 seconds,
then release.
Enter the THREE-DIGIT	Satellite Receiver
	or DBS, etc.
REMOTE CODE NUMBER
for your desired device. The
remote is now ready to send				VOL			CH
commands to the unit.					MUTE
Point the remote at the	Cable Converter
Device. Press the POWER button
on the remote to turn the unit
ON.
SMART HELP			5
		POWER
Remember, if this doesn’t	P	CLOCK
	SLEE
	XIT	CC
	A/CH STATUS/E	TV/VCR
work the first time, repeat steps	RECORD
	TV
	VCR
using the same remote code number.	ACC
		PICTURE
		SOUND	SURF
		ENU
After a second try and the remote		M
does not operate your device, see if			CH
		VOL	E
			MUT
there is another three-digit code num-
ber (pages 34-35) listed for your
device and repeat the steps above
using the new number.
If after repeated attempts the code
number method does not work you
device, try the SEARCH METHOD
on page 33.
		32