How to run a wash cycle or a drying cycle

GB

1. SWITCH THE MACHINE ON. Press the

 

 

 

button; the START/PAUSE indicator light will flash

slowly in a green colour.

2.LOAD THE LAUNDRY. Open the porthole door. Load the laundry, making sure you do not exceed the maximum load value indicated in the table of programmes on the following page.

3.MEASURE OUT THE DETERGENT. Pull out the detergent dispenser drawer and pour the detergent into the relevant compartments as described in "Detergents and laundry".

4.CLOSE THE DOOR.

5.SELECT THE WASH CYCLE. Set the WASH CYCLE knob to the desired programme; a temperature and spin speed is set for each wash cycle; these may be adjusted. The duration of the cycle will appear on the display.

6.CUSTOMISE THE WASH CYCLE. Use the relevant buttons:

Modifying the temperature and/or spin speed. The machine automatically displays the maximum temperature and spin speed values set for the selected cycle, or the most recently-used settings if they are compatible with the selected cycle. The temperature can be decreased by pressing the button, until the cold wash "OFF" setting is reached. The spin speed may be progressively reduced by pressing the button, until it is completely excluded (the "OFF" setting). If these buttons are pressed again, the maximum values are restored.

Setting the drying cycle

The first time the button is pressed, the machine will automatically select the maximum drying cycle which is compatible with the selected wash cycle. Subsequent presses will decrease the drying level and then the drying time, until the cycle is excluded completely ("OFF").

Drying may be set as follows:

A- Based on the desired laundry dryness level: Iron dry: suitable for clothes which will need ironing afterwards. the remaining dampness softens creases, making them easier to remove; "A1" appears on the display.

Hanger dry: ideal for clothes which do not need to be dried fully; "A2" appears on the display. Cupboard dry: suitable for laundry which can be put back in a cupboard without being ironed; "A3" appears on the display.

Extra dry: suitable for garments which need to be dried completely, such as sponges and bathrobes "A4"; appears on the display.

B - Based on a set time period: between 30 and

180minutes.

If your laundry load to be washed and dried is much greater than the maximum stated load (see adjacent table), perform the wash cycle, and when the cycle is complete, divide the garments into groups and put some of them back in the drum. At this point, follow the instructions provided for a "Drying only" cycle. Repeat this procedure for the remainder of the load.

N.B: a cooling-down period is always added to the end of each drying cycle.

Drying only

Use the cycle selector knob to select a drying cycle (11-12-13) in accordance with the type of fabric. The desired drying level or time may also be set using the DRYING button .

Modifying the cycle settings.

•Press the button to enable the option; the indicator light corresponding to the button will switch on.

•Press the button again to disable the option; the indicator light will switch off.

￿If the selected option is not compatible with the programmed wash cycle, the indicator light will flash and the option will not be activated.

￿If the selected option is not compatible with another option which has been selected previously, the indicator light corresponding to the first option selected will flash and only the second option will be activated; the indicator light corresponding to the enabled option will remain lit.

￿The options may affect the recommended load value and/or the duration of the cycle.

7.START THE PROGRAMME. Press the START/ PAUSE button. The corresponding indicator light will become green, remaining lit in a fixed manner, and

the door will be locked (the DOOR LOCKED symbol will be on). To change a wash cycle while it is in progress, pause the Washer-dryer using the START/PAUSE button (the START/PAUSE indicator light will flash slowly in an orange colour); then select the desired cycle and press the START/ PAUSE button again. To open the door while a

cycle is in progress, press the START/PAUSE button; if the DOOR LOCKED symbol is switched off the door may be opened. Press the START/ PAUSE button again to restart the wash cycle from the point at which it was interrupted.

8.THE END OF THE WASH CYCLE. This will be

indicated by the text "End" on the display; when the DOOR LOCKED symbol switches off the door may be opened. Open the door, unload the laundry and switch off the machine.

￿If you wish to cancel a cycle which has already

begun, press and hold the button. The cycle will be stopped and the machine will switch off.

8

Page 7 Page 9
Page 8
Image 8
Indesit IWDE 7145 manual How to run a wash cycle or a drying cycle, Close the Door
Page 7 Page 9

IWDE 7145 specifications

The Indesit IWDE 7145 is a versatile and efficient washer dryer that combines robust washing capabilities with reliable drying performance, making it an ideal solution for households with limited space. This model is designed to meet the needs of busy families, offering a variety of features and technologies that enhance laundry care and convenience.

One of the standout features of the IWDE 7145 is its generous capacity, which allows users to wash up to 7 kg of laundry, and dry up to 5 kg. This makes it suitable for handling larger loads, reducing the number of cycles needed, and saving valuable time. The model boasts a range of wash programs, including specialized options for cottons, synthetics, and delicate fabrics, ensuring optimal results for different types of garments.

The IWDE 7145 incorporates Indesit's innovative Push & Wash technology, which simplifies the washing process. By pushing a single button, users can start a 30-minute wash cycle at 30 degrees Celsius, perfect for freshening up lightly soiled clothes in a hurry. This feature, paired with a rapid wash program, provides flexibility for busy lifestyles, making laundry day more manageable.

In terms of drying capabilities, the Indesit IWDE 7145 features a range of drying programs tailored to different fabric types, ensuring that items come out perfectly dry without the risk of shrinkage or damage. The model uses a sensor drying system that automatically stops the drying cycle when the desired level of dryness is achieved, enhancing energy efficiency and protecting clothes from over-drying.

Energy efficiency is another key characteristic of this washer dryer; it is rated at in terms of energy, which helps to keep electricity bills manageable while also being environmentally friendly. The spin speed is adjustable up to 1400 RPM, effectively extracting excess water from clothes before the drying cycle, allowing for faster drying times.

Overall, the Indesit IWDE 7145 washer dryer blends practicality with performance. Its user-friendly features, impressive capacity, and energy-saving technologies make it a great addition to any home. Whether tackling everyday laundry or delicate items, this appliance is engineered to provide reliable results while simplifying the laundry process. It stands as a testament to Indesit's commitment to creating efficient and practical home appliances for the modern user.
Top Page Image Contents