Troubleshooting

Your Washer-dryer could fail to work. Before contacting the Technical Assistance Centre (see “Assistance”), make

sure that the problem cannot be not solved easily using the following list.

GB

 

Problem:

The Washer-dryer does not switch on.

The wash cycle does not start.

The Washer-dryer does not take in water ("H2O" will flash on the display).

The Washer-dryer continuously takes in and

drains water.

The Washer-dryer does not drain or spin.

Possible causes / Solutions:

•The appliance is not plugged into the socket fully, or is not making contact.

•There is no power in the house.

•The Washer-dryer door is not closed properly.

•The ON/OFF button has not been pressed.

•The START/PAUSE button has not been pressed.

•The water tap has not been opened.

•A delayed start has been set.

•The water inlet hose is not connected to the tap.

•The hose is bent.

•The water tap has not been opened.

•There is no water supply in the house.

•The pressure is too low.

•The START/PAUSE button has not been pressed.

•The drain hose is not fitted at a height between 65 and 100 cm from the floor (see “Installation”).

•The free end of the hose is under water (see “Installation”).

•The wall drainage system is not fitted with a breather pipe.

If the problem persists even after these checks, turn off the water tap, switch the appliance off and contact the Assistance Service. If the dwelling is on one of the upper floors of a building, there may be problems relating to water drainage, causing the Washer-dryer to fill with water and drain continuously. Special anti-draining valves are available in shops and help to avoid this inconvenience.

•The wash cycle does not include draining: some wash cycles require the drain phase to be started manually.

•The “Easy iron” option has been activated: To complete the wash cycle, press the START/PAUSE button (see “Wash cycles and options”).

•The drain hose is bent (see “Installation”).

•The drainage duct is clogged.

The Washer-dryer vibrates a lot during the spin cycle.

•The drum was not unlocked correctly during installation (see “Installation”).

•The Washer-dryer is not level (see “Installation”).

•The Washer-dryer is trapped between cabinets and walls (see “Installation”).

The Washer-dryer leaks.

•The water inlet hose is not screwed on properly (see “Installation”).

•The detergent dispenser drawer is blocked (for cleaning instructions, see “Care and maintenance”).

•The drain hose is not fixed properly (see “Installation”).

The "option" indicator lights and the "start/pause" indicator light flash and an error code appears on the display (e.g.: F-01, F-..).

•Switch off the machine and unplug it, wait for approximately 1 minute and then switch it back on again.

If the problem persists, contact the Technical Assistance Service.

There is too much foam.

The washer-dryer does not dry.

•The detergent is not suitable for machine washing (it should display the text “for Washer-dryers” or “hand and machine wash”, or the like).

•Too much detergent was used.

•The appliance is not plugged into the socket, or not enough to make contact.

•There has been a power failure.

•The appliance door is not shut properly.

•A delayed start has been set.

•DRYING is in the OFF position.

13

Page 12 Page 14
Page 13
Image 13
Indesit IWDE 7145 manual Troubleshooting, Problem, Possible causes / Solutions
Page 12 Page 14

IWDE 7145 specifications

The Indesit IWDE 7145 is a versatile and efficient washer dryer that combines robust washing capabilities with reliable drying performance, making it an ideal solution for households with limited space. This model is designed to meet the needs of busy families, offering a variety of features and technologies that enhance laundry care and convenience.

One of the standout features of the IWDE 7145 is its generous capacity, which allows users to wash up to 7 kg of laundry, and dry up to 5 kg. This makes it suitable for handling larger loads, reducing the number of cycles needed, and saving valuable time. The model boasts a range of wash programs, including specialized options for cottons, synthetics, and delicate fabrics, ensuring optimal results for different types of garments.

The IWDE 7145 incorporates Indesit's innovative Push & Wash technology, which simplifies the washing process. By pushing a single button, users can start a 30-minute wash cycle at 30 degrees Celsius, perfect for freshening up lightly soiled clothes in a hurry. This feature, paired with a rapid wash program, provides flexibility for busy lifestyles, making laundry day more manageable.

In terms of drying capabilities, the Indesit IWDE 7145 features a range of drying programs tailored to different fabric types, ensuring that items come out perfectly dry without the risk of shrinkage or damage. The model uses a sensor drying system that automatically stops the drying cycle when the desired level of dryness is achieved, enhancing energy efficiency and protecting clothes from over-drying.

Energy efficiency is another key characteristic of this washer dryer; it is rated at in terms of energy, which helps to keep electricity bills manageable while also being environmentally friendly. The spin speed is adjustable up to 1400 RPM, effectively extracting excess water from clothes before the drying cycle, allowing for faster drying times.

Overall, the Indesit IWDE 7145 washer dryer blends practicality with performance. Its user-friendly features, impressive capacity, and energy-saving technologies make it a great addition to any home. Whether tackling everyday laundry or delicate items, this appliance is engineered to provide reliable results while simplifying the laundry process. It stands as a testament to Indesit's commitment to creating efficient and practical home appliances for the modern user.
Top Page Image Contents