Troubleshooting

Your washing machine could fail to work. Before contacting the Technical Assistance Centre (see “Assistance”), make sure

 

GB

that the problem cannot be not solved easily using the following list.

Problem:

Possible causes / Solutions:

 

 

The machine does not switch on.

The wash cycle does not start.

The machine does not fill with wa- ter or ‘H20’ flashes in the display.

The machine continuously fills with water and continually drains away or Water left in the drum

or Stuck on wash.

The machine does not drain or spin or F05 error code in the display.

The machine does not heat or poor wash results.

The programme takes too long or The Display changes the esti- mated ‘Time to End’ during the programme.

The machine vibrates a lot during the spin cycle.

•The appliance is not plugged into the socket fully, or not enough to make contact.

•There is no power to the socket, or the fuse has blown in the mains plug.

•The door is not closed properly.

•The ON/OFF button has not been pressed.

•The START/PAUSE button has not been pressed.

•The water tap has not been turned on to allow water to flow into the machine.

•A delayed start has been set.

•The water inlet hose is kinked.

•The water inlet hose is not connected to the water supply.

•The water pressure is too low.

•The water tap has not been turned on to allow water to flow into the machine.

•There is no water supply to the house.

•The inlet valve filter is blocked.

•The START/PAUSE button has not been pressed.

•The top of the drain hose is too low - It must be fitted at a height between 65 and 100 cm from the floor (see “Installation”).

•The drain hose is connected incorrectly to the sink trap allowing water to run into the machine, the drain hose must be positioned higher than the bottom of the sink to prevent water flowing down the drain hose.

•The end of the drain hose has been pushed too far down the standpipe, the

‘U’ bracket should be fitted 100 mm from the end of the drain hose.

•The Pump filter is blocked.

•The drain hose is kinked (see “Installation”).

•New Installation - The blanking cap or spigot has not been removed if connected under a sink.

•The drain hose or sink trap is blocked.

•The wash cycle does not include draining, some wash cycles require the drain phase to be started manually.

•The ‘EASY IRON’ option is enabled, to complete the wash cycle press the

‘START/PAUSE’ button.

•The Spin Speed is set to “OFF”.

•The ‘Temperature’ button is in the “OFF” position.

•Programme times will vary due to water pressure, the incoming water tempera- ture and if the wash load goes out of balance. This will increase the programme times accordingly (see ‘ The machine wont spin properly’ below).

•The feet have not been adjusted, enabling the machine to rock.

•New Installation - Either the Transit Bolts including the plastic spacers, or the

Polystyrene Packaging have not been removed when installing the machine.

•The machine is trapped between cabinets and/or walls.

•The load is in a slight out of balance condition and machine is spinning, but at a lower speed.

The machine is noisy.

• There will always be some motor, pump and drum noise during spin.

13

Page 12 Page 14
Page 13
Image 13
Indesit IWE 7145 K manual Troubleshooting, Problem Possible causes / Solutions
Page 12 Page 14

IWE 7145 K specifications

The Indesit IWE 7145 K is a well-regarded washing machine that combines practicality with advanced technology to cater to modern laundry needs. This front-loading washing machine features a sleek and compact design, making it a great fit for various living spaces without compromising on capacity or performance.

With a substantial 7 kg washing capacity, the IWE 7145 K is ideal for families or individuals with regular laundry needs. It offers a spin speed of 1400 RPM, ensuring effective water extraction from your laundry, leading to quicker drying times. This model operates efficiently and therefore makes it perfect for daily use or handling larger loads during weekends.

One of the standout features of the Indesit IWE 7145 K is its range of wash programs. It comes equipped with 16 different programs, including a dedicated cycle for wool, delicate items, and a quick wash option that can take as little as 30 minutes. This versatility allows users to select the right settings for various fabrics and soiled items, ensuring optimal cleaning without the risk of damage.

Additionally, the IWE 7145 K boasts Indesit’s innovative Push & Wash technology. With just a single button press, users can initiate a mixed load wash cycle that lasts only 50 minutes, making it perfect for busy individuals and families. This feature simplifies the laundry process, allowing for quick cleaning without sacrificing effectiveness.

Energy efficiency is another area where the Indesit IWE 7145 K excels. Rated at A++ for energy performance, it helps reduce electricity consumption, leading to lower utility bills. The eco-friendly wash programs further contribute to reduced environmental impact by minimizing water usage and energy during cycles.

In terms of usability, the machine is designed with a user-friendly control panel that allows for straightforward program selection and adjustment. The modern LED display makes it easier to monitor cycle progress and select preferred options.

In summary, the Indesit IWE 7145 K is a dependable washing machine that combines a substantial load capacity, a variety of wash programs, and energy-efficient features. With its practical design and advanced technologies, it continues to be a popular choice for anyone seeking a reliable laundry solution.
Top Page Image Contents