Connecting the drain hose

• the supply voltage is included within the values indica

GB

ted on the Technical details table (see page 5);

 

65 - 100 cm

Connect the drain hose, without bending it, to a draining duct or a wall drain situated between 65 and 100 cm from the floor;

•the socket is compatible with the washing machine’s plug. If this is not the case, replace the socket or the plug.

Your appliance is now supplied with a 13 amp fused plug it can be plugged into a 13 amp socket for immediate use. Before using the appliance please read the instructions below.

Where it connects to the waste water pipe cut end off spigot or remove the blanking cap

The drain hose may be connected to an under- sink trap. Before connec- ting the drain hose from the machine ensure that any blanks or removable ends have been taken off the spigot.

If it is place over the edge of a basin or sink be sure the free end of the hose should not be underwa- ter.

WARNING - THIS APPLIANCE MUST BE EARTHED. THE FOLLOWING OPERATIONS SHOULD BE CARRIED OUT BY A QUALIFIED ELECTRICIAN.

Replacing the fuse:

When replacing a faulty fuse, a 13 amp ASTA approved fuse to BS 1362 should always be used, and the fuse cover re-fitted. If the fuse cover is lost, the plug must not be used until a replacement is obtained.

Replacement fuse covers:

If a replacement fuse cover is fitted, it must be of the correct colour as indicated by the coloured marking or the colour that is embossed in words on the base of the plug. Replacements can be obtained directly from your nearest Service Depot.

Removing the plug:

If your appliance has a non-rewireable moulded plug and you should wish to re-route the mains cable through parti- tions, units etc., please ensure that either:

the plug is replaced by a fused 13 ampere re-wearable plug bearing the BSI mark of approval.

!We advise against the use of hose extensions; in case of absolute need, the extension must have the same diameter as the original hose and must not exceed 150 cm in length.

Ensure that if the drain hose is pushed into a standpipe, that the end does not go down more than 15cms (6 in- ches). If the hose is pushed down too far, this may cause the machine to self -syphon ie. continuously empty as it is filling.

Electric connection

Before plugging the appliance into the mains socket, make sure that:

•the socket is earthed and in compliance with the ap- plicable law;

•the socket is able to sustain the appliance’s maximum power load indicated in the Technical details table (see page 5);

or:

the mains cable is wired directly into a 13 amp cable out- let, controlled by a switch, (in compliance with BS 5733) which is accessible without moving the appliance.

Disposing of the plug:

Ensure that before disposing of the plug itself, you make the pins unusable so that it cannot be accidentally inserted into a socket.

Instructions for connecting cable to an alternative plug: Important: the wires in the mains lead are coloured in accordance with the following code:

Green & Yellow Earth

Blue Neutral

Brown Live

3

Page 2 Page 4
Page 3
Image 3
Indesit IWSC 5125 manual Replacing the fuse, Removing the plug, Disposing of the plug
Page 2 Page 4

IWSC 5125 specifications

The Indesit IWSC 5125 is a versatile and efficient washing machine designed to meet the needs of modern households. Offering a perfect blend of functionality and user-friendliness, this model is ideal for those seeking an effective laundry solution without compromising on quality.

One of the standout features of the IWSC 5125 is its substantial capacity, accommodating up to 5 kilograms of laundry. This makes it suitable for small to medium-sized families, allowing users to wash a variety of garments in one cycle. The appliance operates at a maximum spin speed of 1200 RPM, which ensures clothes come out drier and requires less time in the tumble dryer, contributing to energy savings.

Energy efficiency is a core characteristic of the Indesit IWSC 5125, with a notable A+ rating. This means it consumes less energy compared to lower-rated models, making it an environmentally friendly choice that can help reduce utility bills.

This washing machine is equipped with several wash programs tailored for different fabric types and cleaning needs. Among the key offerings are programs for cotton, synthetic materials, and delicate fabrics, ensuring optimal care for every item. The rapid wash function allows users to complete shorter cycles in just 30 minutes, perfect for those in a hurry who need clean clothes in no time.

Additionally, the IWSC 5125 incorporates Indesit’s innovative Push and Wash technology. With just a single push of a button, users can initiate a 50-minute wash cycle for cotton and synthetic garments at a temperature of 30°C. This feature is particularly beneficial for busy individuals who appreciate efficiency without sacrificing cleanliness.

The machine also boasts a delay timer, which grants users the flexibility to schedule washes at their convenience. This is especially useful for taking advantage of off-peak energy tariffs or ensuring laundry is complete just when it’s needed.

Safety and reliability are prioritized with the inclusion of features such as child lock and overload protection. These elements ensure peace of mind during operation, particularly in households with young children.

In sum, the Indesit IWSC 5125 stands out for its capacity, energy efficiency, and range of practical technologies that cater to the diverse needs of its users. With its modern features and thoughtful design, this washing machine continues to make laundry chores a breeze.
Top Page Image Contents