Gas connection

The cooker should be connected to the gas-supply by a corgi registered installer. During installation of this product it is essential to fit an approved gas tap to isolate the supply from the appliance for the convenience of any subsequent removal or servicing. Connection of the appliance to the gas mains or liquid gas must be carried out according to the prescribed regulation in force, and only after it is ascertained that it is adaptable to the type of gas to be used. If not, follow the instructions indicated in the paragraph headed “Adaptation to different gas types”. On some models the gas supply can be connected on the left or on the right, as necessary; to change the connection, reverse the position of the hose holder with that of the cap and replace the gasket (supplied with the appliance). In the case of connection to liquid gas, by tank, use pressure regulators that conform to the regulation in force. The gas supply must be connected to the left of the appliance. Be sure that the hose does not pass through the rear of the cooker touching hot parts.

HOT PARTS

600 mm

Important: make sure the supply pressure conforms with the values shown in the table entitled “Caracteristics of the burners and nozzles”. When the cooker is installed between cabinets (recessed), the gas connection must be effected by an approved flexible hose with bayonet fitting (BS 669 Current Edition).The gas inlet for the cookers is a threaded G 1/2 gas female fitting.

Connecting the gas supply

To make the connection, a flexible hose should be used corresponding to the current gas regulations which are:

the hose must never be at any point in its lenght in contact with the “hot” parts of the cooker;

the hose must never be longer than 1,5 metre;

the hose must not be subject to any tension or torsional stress and it must not have any excessively narrow curves or bottlenecks;

the hose must be easy to inspect along its entire length to check its condition;

the hose must always be in good condition, never attempt to repair.

Important: the installation must comply with gas safety (installation and use) regulations 1984. In all cases for the above, by low, a qualified, corgi approved engineer must be called for installation.

Important: Before using the oven, position the oven burner deflector "A" (provided with the appliance) in the correct place by inserting the lower tab into the support slot (see figure).

A

5

Page 5
Image 5
Indesit KD3G2S/IR, KD3G21S/IR manual Gas connection, Connecting the gas supply

KD3G2S/IR, KD3G21S/IR specifications

Indesit KD3G21S/IR and KD3G2S/IR are versatile, modern cooking appliances designed to enhance your kitchen experience. With their sleek and stylish designs, these cookers not only add aesthetic value but also deliver excellent functionality for everyday cooking needs.

One of the standout features of both models is their gas cooking technology, providing reliable and efficient heat for perfect cooking results. The gas burners allow for precise temperature control, which is essential for a variety of cooking tasks, from simmering sauces to searing meats. The models come equipped with multiple gas burners of different sizes, including a powerful wok burner, making them ideal for all types of cooking, whether you're preparing a quick meal or a gourmet feast.

The KD3G21S/IR and KD3G2S/IR also feature a spacious oven compartment that allows for cooking larger dishes. The modern design includes a conventional oven, ensuring even heat distribution for consistent baking and roasting results. Additionally, both models incorporate a grill function, perfect for achieving that perfect crisp on your meats and veggies.

Safety is a priority with Indesit, and these cookers come with essential safety features, including flame failure devices that automatically cut off the gas supply if a flame goes out. This safety measure gives peace of mind while cooking, especially for families with children.

Cleaning is simplified with these models' easy-clean enamel oven interiors, designed to resist food residue and stains. With removable oven racks and trays, maintaining cleanliness is straightforward and hassle-free.

Another significant characteristic of the KD3G21S/IR and KD3G2S/IR is energy efficiency. Both cookers are designed to reduce energy consumption without sacrificing performance. This not only benefits your utility bills but also contributes to a more environmentally friendly kitchen.

In terms of design, the modern finish and clean lines ensure that these cookers fit seamlessly into any kitchen decor, whether contemporary or traditional. Their user-friendly controls make adjustments straightforward, allowing you to focus on what matters most: cooking delicious meals.

In summary, the Indesit KD3G21S/IR and KD3G2S/IR are impressive gas cookers that combine functionality, safety, and style. With their advanced features and reliable performance, they are an excellent addition to any home, perfect for both novice cooks and seasoned chefs alike.