Start-up and use
GB
Starting the appliance
!After transportation of the appliance, carefully place it in an upright position and wait at least 3 hours before connecting it to the electricity mains, to make sure it operates as it should.
• Clean the inside of the refrigerator well using warm water and bicarbonate of soda before placing food inside it.
• The appliance comes with a motor protection control system which makes the compressor start approximately 8 minutes after being switched on. The compressor also starts each time the power supply is cut off whether voluntarily or involuntarily (blackout).
Freezer Compartment
When the product is switched on (the ON/OFF button is pressed for more than two seconds) the freezer compartment is set to its default value of
Refrigerator Compartment
When the appliance is switched on the refrigerator compartment is set to its default value of +5°C. We recommend that the SUPER COOL function is set (the refrigerator status bar continues to display the set value) in order to accelerate the cooling process of the compartment. After a few hours it will be cool enough for food to be placed inside.
Navigating the display
Setting the temperatures:
If the product is switched on, the refrigerator and freezer status bars will indicate the temperatures set at that moment. To change them, simply press the - and + buttons corresponding to the compartment for which you wish to change the set temperature. More specifically, each time one of the buttons is pressed the temperature is increased or decreased by 1°, and the level of cold is adjusted accordingly.The temperature values that may be selected for the refrigerator compartment are +12°C, +7°C, +6°C, +5°C, +4°C, +3°C and +2°C, while the values that may be set for the freezer are
The temperatures are automatically set to +5°C for the refrigerator compartment and
Whenever it is necessary to activate the “ECO” function at temperatures that are different to the standard storage values, the “ECO” button must be pressed as soon as the function is activated and held down while the new temperatures are set using the - and + buttons. Under these conditions, the temperatures may be set to 4°C, 5°C and 6°C for the refrigerator compartment and
When the HOLIDAY function is active the temperature may not be adjusted, however the appliance adjusts itself automatically so that the optimal settings for the situation are used: +12°C for the refrigerator compartment and - 18°C for the freezer compartment. This function is indicated by the text.
To activate and deactivate the functions simply press the relevant button and the function status will be signalled by the corresponding LED switching on or off.
Several functions (SUPER COOL, SUPER FREEZE, BOTTLE CHILL, ECO) are incompatible with others (HOLIDAY,...); remember that there is a
When the BOTTLE CHILL function has finished, press the BOTTLE CHILL button to stop the corresponding LED from flashing and to silence the sound signal. This flashing and sound signal indicates that the function is complete and that the bottle should be removed from the freezer compartment.
Child Lock
In order to activate the Child Lock function, the Child Lock button must be pressed for 2 seconds; the activation of the button lock is confirmed by a short beep and the illumination of the corresponding LED.
To deactivate the function, press the Child Lock button for 2 seconds; deactivation will be confirmed by a short beep and by the corresponding LED switching off.
!The FREEZER status bar is also used to indicate an unusual temperature increase in the freezer compartment (see Troubleshooting).
6
