Running a wash cycle
GB | 1. SWITCH THE MACHINE ON. Press the |
| button; | |
| ||||
the START/PAUSE indicator light will flash slowly in a | ||||
| ||||
| blue colour. | |||
2.LOAD THE LAUNDRY. Open the porthole door. Load the laundry, making sure you do not exceed the maximum load value indicated in the table of programmes and wash cycles on the following page.
3.MEASURE OUT THE DETERGENT. Pull out the detergent dispenser drawer and pour the detergent into the relevant compartments as described in “Detergents and laundry”.
4.CLOSE THE DOOR.
5.SELECT THE WASH CYCLE. Use the WASH CYCLE SELECTOR knob to select the desired wash cycle. A temperature and spin speed is set for each wash cycle; these values may be adjusted. The duration of the cycle will appear on the display.
6.CUSTOMISE THE WASH CYCLE. Use the relevant buttons:
Modify the temperature and/or spin speed. The machine automatically displays the maximum temperature and spin speed values set for the selected cycle, or the most
can be decreased by pressing the 
button, until the cold wash “OFF” setting is reached. The spin speed may be progressively reduced by pressing
the 
button, until it is completely excluded (the
“OFF” setting). If these buttons are pressed again, the maximum values are restored.
Setting a delay timer.
To set a delayed start for the selected cycle, press the corresponding button repeatedly until the required delay period has been reached. When this option has been
activated, the 
symbol lights up on the display. To remove the delayed start setting, press the button until the text “OFF” appears on the display.
Modify the cycle settings.
•Press the button to enable the option; the indicator light corresponding to the button will switch on.
•Press the button again to disable the option; the indicator light will switch off.
!If the selected option is not compatible with the set wash cycle, the indicator light will flash and the option will not be activated.
!If the selected option is not compatible with
a previously selected one, the indicator light
corresponding to the first function selected will flash and only the second option will be activated; the indicator light for the option which has been activated will be illuminated.
Note: if the 
option has been selected, none of the incompatible options may be activated.
! The options may affect the recommended load value and/or the duration of the cycle.
7.START THE WASH CYCLE. Press the START/ PAUSE button. The corresponding indicator light will turn blue, remaining lit in a fixed manner, and the door will be locked (the DOOR LOCKED 
symbol will be lit). To change a wash cycle while it is in progress, pause the washing machine using the START/PAUSE button (the START/PAUSE indicator light will flash slowly in an amber colour); then select the desired cycle and press the START/PAUSE button again.
To open the door while a cycle is in progress, press
the START/PAUSE button; if the DOOR LOCKED 
symbol is switched off the door may be opened (wait approximately 3 minutes). Press the START/PAUSE button again to restart the wash cycle from the point at which it was interrupted.
8.THE END OF THE WASH CYCLE. This will be indicated by the text “END” on the display; when the DOOR LOCKED 
symbol switches off the door may be opened (wait approximately 3 minutes). Open the door, unload the laundry and switch off the machine.
!If you wish to cancel a cycle which has already begun,
press and hold the 
button. The cycle will be stopped and the machine will switch off.
Load balancing system
Before every spin cycle, to avoid excessive vibrations before every spin and to distribute the load in a uniform manner, the drum rotates continuously at a speed which is slightly greater than the washing rotation speed. If, after several attempts, the load is not balanced correctly, the machine spins at a reduced spin speed. If the load is excessively unbalanced, the washing machine performs the distribution process instead of spinning. To encourage improved load distribution and balance, we recommend small and large garments are mixed in the load.
8
