Troubleshooting

Your washing machine could occasionally fail to work. Before contacting the Technical Assistance Centre

 

(see “Service”), make sure that the problem is not easily solved using the following list.

GB

Problem:

The washing machine does not switch on.

The wash cycle won’t start.

The washing machine does not fill with water (the DOOR LOCKED indicator light flashes rapidly).

The machine continuously fills with water and drains.

The washing machine does not drain or spin.

The machine vibrates a lot during the spin cycle.

The washing machine leaks.

The DOOR LOCKED indicator light flashes rapidly.

Too much foam.

Possible causes / Solutions:

The appliance is not plugged into the socket fully, or is not making contact.

There is no power in the house.

The washing machine door is not closed properly.

The ON/OFF button has not been pressed.

The START PROGRAMME buttons have not been pressed (they are still flashing).

The water tap has not been opened.

The water inlet hose is not connected to the tap.

The hose is bent.

The water tap has not been opened.

There is no water supply in the house.

The pressure is too low.

The START PROGRAMME buttons have not been pressed (they are still flashing).

The drain hose is not fitted at a height between 65 and 100 cm from the floor ( see “Installation”).

The free end of the hose is under water (see “Installation”).

The wall drainage system is not fitted with a breather pipe.

If the problem persists even after these checks, shut off the water tap, switch the appliance off and contact the Technical Assistance Service. If the dwelling is on one of the upper floors of a building, there may be problems relating to water drainage, causing the washing machine to fill with water and drain continuously. Special anti-draining valves are available in shops and help to avoid this inconvenience.

The drain hose is bent (see “Installation”).

The drainage duct is clogged.

The protective screws (used during transportation) were not removed when the appliance was installed. Remove the screws (see “Installation”).

The machine is not level (see “Installation”).

The machine is trapped between cabinets and walls (see “Installation”).

The water inlet hose is not screwed on properly (see “Installation”).

The detergent dispenser is blocked (to clean it, see “Care and maintenance”).

The drain hose is not fixed in place properly (see “Installation”).

The drip-tray system is full. Clean the sponge or replace it (see "Precautions and advice").

Switch off the machine and unplug it, wait for approximately 1 minute and then switch it back on again. The wash cycle will have to be started again from the beginning. If the problem persists, contact the Technical Assistance Service.

The detergent is not suitable for machine washing (it should bear the description “for washing machines” or “hand and machine wash”, or similar instructions).

Too much detergent was used.

13

Page 13
Image 13
Indesit SIXL 145 SK manual Troubleshooting, Problem, Possible causes / Solutions

SIXL 145 SK specifications

The Indesit SIXL 145 SK is a modern washing machine designed to fulfill the diverse laundry needs of contemporary households. With a capacity of 7 kilograms, it is ideally suited for small to medium-sized families, effortlessly accommodating daily laundry demands while ensuring efficient performance. Its sleek design and attractive white finish enhance any laundry space while maintaining functionality.

One of the standout features of the Indesit SIXL 145 SK is its B energy efficiency rating, which signifies minimal energy consumption without compromising on performance. This efficiency is complemented by the Eco Cycle program, enabling users to wash their clothes effectively while saving on energy bills and minimizing environmental impact.

The washing machine boasts a range of 16 different programs, catering to various fabric types and stains. Key cycles include Cotton, Synthetics, and Delicates, allowing users to select the optimal setting for each load. The Rapid Wash function is particularly noteworthy, allowing for quick cycles in just 30 minutes, perfect for days when time is of the essence.

Additionally, the Indesit SIXL 145 SK incorporates a special Anti-Stain program, engineered to tackle tough stains even at lower temperatures. This innovative technology ensures that were circumstances arise where prolonged stain treatment is necessary, the washing machine can deliver excellent results without damaging fabrics.

Another impressive characteristic of the Indesit SIXL 145 SK is its Spin Speed of up to 1400 RPM. This high spin rate ensures that excess water is effectively removed from clothes, reducing drying time and improving energy efficiency when using a tumble dryer. Users benefit from well-dried laundry straight out of the machine, minimizing laundry time overall.

For added convenience, the machine includes a Delay Timer feature, enabling users to program washes to start at a more convenient time. This is particularly beneficial for those who want to take advantage of lower energy tariffs during off-peak hours.

In terms of user-friendliness, the Indesit SIXL 145 SK features a straightforward control panel with a rotary dial and buttons, simplifying operation. The clear LED display provides essential information about the selected cycle, remaining time, and any errors, enhancing the overall user experience.

In summary, the Indesit SIXL 145 SK combines stylish design, energy efficiency, and a versatile range of washing programs to provide an excellent washing solution for modern households. Its advanced features and user-friendly interface make it a reliable choice for anyone looking to streamline their laundry process.