Mounting the wooden panel onto the door and inserting the machine into cabinets:
In the case where the machine must be shipped for final installation after the wooden panel has been mounted, we suggest leaving it in its original packaging. The packaging was designed to make it possible to mount the wooden panel onto the machine without removing it completely (see figures below).
lavabiancheria |
| ||||
washing | machine |
| |||
laver |
| ||||
machine | 6 | ||||
| |||||
waschmaschine | 4 | ||||
|
|
|
| 5 | |
|
|
|
| 3 | |
|
|
|
| 2 | |
|
|
|
| 1 | |
Lato porta |
|
| |||
Doo | r side |
|
| ||
| rte |
|
| ||
Cote po |
|
|
| ||
Tur | seite |
|
| ||
A
C
lava | bianc | heria |
| ||
|
| machine |
| ||
washing |
| ||||
| laver |
| |||
mach | ine |
| 6 | ||
|
| ||||
|
|
| |||
waschmaschine | 4 | ||||
|
|
|
|
| 5 |
|
|
|
|
| 3 |
|
|
|
|
| 2 |
Lato porta |
|
|
|
|
|
Door side |
|
|
|
|
|
Cote |
|
|
|
|
|
E
Instructions for the fitter
The wooden panel that covers the face of the machine must not be less than 18 mm in thickness and can be hinged on either the right or left. For the sake of practicality when using the machine, we recommend that the panel be hinged on the same side as the door for the machine itself - the left.
Door Mounting Accessories
(Fig.
N° 2 Hinge Supports
N° 2 Hinges
Fig. 1 | Fig. 2 |
N° 1 Magnet | N° 1 Magnet plate |
Fig. 3 | Fig. 4 |
B
D
N° 1 Rubber plug
Fig. 5
-No. 6 type A
-No. 2 type B metric, countersunk screws, l =25; for fastening the magnet plate to the cabinet.
-No. 4 type C metric screws, l =15 mm; for mounting the hinge supports to the cabinet.
-No. 4 type D metric screws, l =7 mm; for mounting the hinges on the supports.
N° 1 Spacer
Fig. 4/B
13Instructions for installation and use
