Washing machine description
| Control panel | FUNCTION |
| |
| Buttons |
| ||
GB | START/ | |||
|
| |||
|
|
| ||
|
| DOOR | PAUSE | |
|
| LOCK | Button | |
|
| Led |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| PROGRAMME/ | |
Detergent dispenser |
|
|
| ||
Leds |
| ||||
|
| Knob | |||
|
|
|
| ||
|
|
| TEMPERATURE | ||
|
|
| Knob | ||
Detergent dispenser: to add detergent and fabric softener (see page 10).
LEDS: to find out the wash cycle progress.
FUNCTION buttons: to select the functions available. The button corresponding to the function selected will remain on.
TEMPERATURE knob: to set the temperature or the cold wash cycle (see page 9).
DOOR LOCK Led: to find out whether the washing machine is on and if the appliance door can be opened (see page 7).
START/PAUSE button: starts or temporarily interrupts programmes.
N.B.: once the programme has started, pressing this button will stop the cycle and only the LED for the cycle phase in progress will light up. After about 1 minute you will be able to open the door (when the DOOR LOCK led switches off). If the DOOR LOCK led stays lit, it means that there is something that needs to be checked before the door is opened (e.g.: there is water in the tub or the temperature of the water is too high).
Pressing the button again restarts the programme from the point at which it was interrupted.
The knob stays still during the cycle.
6
