Indesit WIA 121 manual Personalisations, Setting the temperature, Functions

Personalisations

Setting the temperature

Turn the TEMPERATURE knob to set the wash temperature (see Programme table on page 8). The temperature can be lowered, or even set to a cold wash ().

Functions

To enable a function:

1.press the button corresponding to the desired function, according to the table below;

2.the function is enabled when the corresponding button is illuminated.

Note: The rapid flashing of the button indicates that the corresponding function cannot be selected for the programme set.

Function	Effect	Comments		Enabled with
				programmes:
	Cuts the duration			1, 2, 3, 4,
	of the wash cycle
Rapid				5, 6, 7
	by 30%.
wash
	This option	When this function is set, programmes 5, 6, 7, 9, 10 will end with
	reduces the
		the laundry left to soak (Anti-crease) and the Rinse cycle phase		5, 6, 7, 9, 10,
	amount of
		LED	will flash.
	creasing on			Delicate
		- to conclude the cycle, press the START/PAUSE button;
	fabrics, making			Rinse cycle.
Anti-		- to run the draining cycle alone, set the knob to the relative
	them easier to
		symbol	and press the START/PAUSE button.
crease	iron.

￿The machine has an intelligent built in check for out of balance loads. To let protect your machine it may reduce the final spin speed if an unbalanced load is detected.

The balancing attempts may extend the total duration of the cycle, up to a maximum of 10 minutes.

GB

Installation Description Programmes Detergents Precautions

Care Troubleshooting Service

9