.
.
.
.
.
.
.
.
.Replacing PP55 Battery
To replace the battery in the PP55 printer follow the steps below.
Hard Cradled version:
1.Remove the device from the cradle.
2.Using a Philips screw driver remove the (2) cradle screws at point (A). Note: do not detach the flex cable that connects the cradle to the base unit.
3.Using a Philips screw driver remove the battery cover screw at point (B).
Soft Cradled (Cabled) version:
1.Detach the device from the PP55 interface cable.
2.Using a Philips screw driver remove the battery cover screw at point (B).
B
A
Battery Cover | PDA Cradle |
Figure 17
Infinite Peripherals, Inc. | Page 18 |
www.ipcprint.com | . . . . . . . . . . . . . . . . . . . . . . . . . . . . |