.
.
.
.
.
.
.
.
.Verify Printer Connected
After installing the Print Manager software package on to your PDA, do a quick check to determine if the printer is charged and PDA is securely in the
The following will help you to determine these conditions.
Case #1: Open the Print Manager so that the screen on the right is displayed.
Note that the printer [Voltage] indicates no data.
The same is true for the [Temperature] option.
This means that
Figure 23
Case #2: Open the Print Manager so that the screen on the right is displayed.
Tap the [ Connect ] command option.
If connection was successful, the Voltage and Temperature fields should now indicate values as shown in the example on the right.
Figure 24
Note: If Voltage and Temperature fields still show no connectivity as in Case #1 and the battery has been initially charged, refer back to section “Attaching PDA” to make sure the PDA has been attached correctly.
Infinite Peripherals, Inc. | Page 22 |
www.ipcprint.com | . . . . . . . . . . . . . . . . . . . . . . . . . . . . |