.
.
.
.
.
.
.
.
.Printer & Port Configuration
Depending on your Pocket PC device, Print Manager [Ports] options must be configured correctly in order for the PP55 to properly communicate with your device.
*Tap on the [ Other ] menu item and select [ Printer Settings ] as shown in the figure on the right.
Printer:
By default, printer is configured to use the [ PP55 ] thermal printer. If
Figure 21
Note:
The default printer needs only to be set once. After the initial configuration Print Manager remembers that last configuration. Installing Print Manager resets the default printer settings and requires reconfiguration
Connection:
By default, Print Manager is configured to use the [ RS232 ] communications port.
If you are not certain what communications port your device supports, use the default printer port settings.
Note:
The default port speed should be the same as the PP55 port speed. Factory default of the PP55 port speed is set to [115200]. Do not use other port speed unless you are certain that the PP55 port speed is different from the factory default.
| Figure 22 |
Infinite Peripherals, Inc. | Page 21 |
www.ipcprint.com | . . . . . . . . . . . . . . . . . . . . . . . . . . . . |