2D Barcode Scanning

Using the 2D barcode scanner:

The Linēa-pro 4 2D uses a scan engine that supports one-dimensional (1D) and two-dimensional (2D) barcode symbols. The effective reading distance of the barcode reader varies depending on the barcode size.

Scanning 2D Barcodes:

To scan a 2D barcode fist activate the scanner. Then position the scan head to center the red aiming laser near the center of the barcode and the illumination box is over the outer edges of the barcode as shown in the figure below.

Slowly pull back the unit increasing the distance between the barcode and scan head until the barcode has been read by the scanner.

~ 15-20 cm

Scan button

Figure 11

Infinite Peripherals, Inc.

www.ipcprint.com. . . . . . . . . . . .Page. . .15. . . . .

Linēa-pro 4 User Manual v1.00