TILT ADJUSTMENT
For optimum performance, the
If you need to tilt the Intermezzo 3.5c, refer to Figure 3 as you perform the following steps:
1.Open the accessory pack and locate the following items: three feet (of different lengths), three locking nuts and one wrench.
2.Lay the speaker upside down and locate the threaded hole on the bottom.
3.Screw in the appropriate foot for the desired amount of tilt.
4.Tighten the nut with the enclosed wrench.
5.Carefully flip the speaker upright.
FIGURE 3 – This cross section shows where to install a foot on the bottom of the Intermezzo 3.5c center-channel speaker.
INTERMEZZO 3.5c | 3 |