OPERATION

With LFE Connection

If you are using the LFE input, the subwoofer's CROSSOVER control is NOT active, because this function is controlled by your surround processor.

When using the LFE input, set the subwoofer's VOLUME control to "Max" and calibrate the subwoofer level along with the other speakers according to the set-up instructions in the owner's manual for your surround receiver/amplifier.

Other Connections

If you are using any other connection method, start with the subwoofer VOLUME control in the "9 o'clock" position and the CROSSOVER in the 12 o'clock position.

To fine-tune the subwoofer's volume and crossover frequency settings, listen to familiar material with powerful bass at a typical listening level.

Bass response should not overpower the room, but instead contribute to a harmonious blend across the entire musical range.

Many users have a tendency to set the subwoofer volume and crossover too high, believing that a subwoofer is there to produce lots of boom and shake the room to make its presence felt.

This is not entirely true.A subwoofer is there to enhance bass, extending the response of the entire system so that bass can be felt as well as heard.

However, overall balance must be maintained; otherwise, the music will not sound natural.

An experienced listener will set the volume and crossover of the subwoofer so that its impact on bass response is always there, but is never obtrusive.

Phase Control

The proper adjustment of the subwoofer's rear panel phase switch for your system depends on several variables such as room size, subwoofer placement and listener position.

Listen to a familiar selection with powerful bass at a typical listening level, while occasionally changing the position of the phase switch.

The position which provides maximum bass output at your listening position is the correct position.

Auto-On Signal Sensing

The Oreus Subwoofer incorporates automatic signal-sensing circuitry which turns the subwoofer on instantly when an audio signal is present. When a signal has not been detected for approximately 1.5 minutes, the subwoofer automatically goes into standby mode.

8

Page 7 Page 9
Page 8
Image 8
Infinity Oreus HCS manual Operation, With LFE Connection, Other Connections, Phase Control, Auto-On Signal Sensing
Page 7 Page 9

Oreus HCS specifications

Infinity Oreus HCS is a groundbreaking advancement in the realm of high-capacity storage solutions, designed to meet the increasing demands for data storage in both enterprise and cloud environments. This cutting-edge technology provides remarkable performance and reliability, making it an ideal choice for organizations seeking to enhance their data management capabilities.

One of the main features of Infinity Oreus HCS is its exceptional scalability. The system supports a modular architecture that allows organizations to easily expand capacity as their data needs grow. This flexibility is crucial in today’s rapidly evolving digital landscape, where the volume of data generated by businesses continues to skyrocket. Users can start with a configuration that meets their current needs and expand without the need for a complete system overhaul.

Another key characteristic of the Infinity Oreus HCS is its advanced data protection and integrity mechanisms. The system incorporates sophisticated error correction algorithms and data redundancy techniques to ensure that stored information remains secure and accessible even in the event of hardware failures. This is particularly important for businesses that rely heavily on data for their operations and decision-making processes.

In terms of performance, Infinity Oreus HCS utilizes cutting-edge solid-state drive (SSD) technology combined with high-speed interconnects that significantly enhance data transfer rates. This results in minimal latency and faster access times, which is vital for applications requiring real-time data processing. Moreover, the system is designed to support a wide range of data workloads, from standard file storage to complex database applications, making it versatile across various use cases.

The integration of artificial intelligence (AI) and machine learning (ML) capabilities is another distinguishing feature of Infinity Oreus HCS. These technologies enable predictive analytics for data management, assisting administrators in optimizing storage allocation and performance based on usage patterns. This intelligent approach not only streamlines operations but also maximizes resource efficiency.

Overall, Infinity Oreus HCS emerges as a comprehensive high-capacity storage solution that combines scalability, reliability, and performance, setting a new standard in data management. Its innovative technologies and features make it an essential asset for organizations navigating the complexities of the digital age, ensuring they can efficiently store, protect, and manage their critical data. The future of storage is here with Infinity Oreus HCS, empowering businesses to thrive in an information-driven world.
Top Page Image Contents