Infinity Step Four, Step Five, Step Six, 4TSS-CENTER4000, End Cap End Cap 1/4-20x 3/4 Screw

Step Four

Using the included Allen wrench, remove the top and bottom end caps of the speaker by unscrewing the single center screw on bottom.

End Cap

End Cap

1/4-20 x 3/4" Screw

Step Five

Connect the wires (page 5). Replace the end caps while capturing the wall bracket between parts A and B of the end cap, securing it in place.

Step Six

The wall-bracket design allows for rotation of the speakers at angles up to 30 degrees of center. Position the speakers so they face toward the primary listening position, before fully tightening.

Wall-Mount

End Cap B

Wall-Mount

End Cap A

4TSS-CENTER4000