Using the audio

To use the projector’s speaker, connect your source to the Audio In connec-

connect optional audio cable

tor on the projector.

 

To adjust the volume, press the Volume buttons on the keypad.

 

Troubleshooting Audio

 

If you aren’t hearing the audio, check the following:

 

•Make sure the optional audio cable is connected.

Visit www.infocus.com\accessories to view optional cables.

adjust volume

•Make sure the volume is turned up enough. Press the Volume button on the keypad.

• Make sure the correct source is active.

•Adjust the audio source.

•If playing a video, make sure the playback has not been paused.

Using the keypad buttons

Most buttons are described in detail in other sections, but here is an overview of their functions:

Menu–opens the on-screen menus (page 31).

Select–confirms choices made in the menus (page 31).

Up/Down arrows–navigates to and adjusts settings in the menus (page 31).

Auto Image–synchs the projector to the source.

Presets–cycles through the available preset settings (page 33).

Keystone–adjusts squareness of the image (page 8).

Volume–adjusts sound (page 28).

Video and Computer–changes the active source.

menu navigation buttons

28