Adjusting the image
Adjust the height of the projector, if necessary, by pressing the release but- | adjust height |
|
ton to extend the foot. |
| rotate |
|
| |
Rotate the leveling foot located at the rear of the projector, if necessary. |
| leveling |
| elevator | foot |
Avoid placing your hands near the hot exhaust vent in front of the projector. | foot | release button |
Position the projector the desired distance from the screen at a 90 degree | adjust distance |
|
angle to the screen. |
|
See page 41 for a table listing screen sizes and distances.
adjust zoom or focus
Adjust the zoom or focus.
focus
(thin ring)zoom (thick ring)
If the image is not square, adjust the keystone using the buttons on the key- | adjust keystone |
| |
pad. |
|
Press the top Keystone button to reduce the upper part of the image, and press the bottom Keystone button to reduce the lower part.
Adjust the Contrast or Brightness in the Picture menu.
See page 32 for help with these menu adjustments.
adjust Picture menu
8