![](/images/new-backgrounds/1191391/1913917x1.webp)
4 Turn on the projector
1 Plug the power cord into the projector and into an electrical outlet
The power light on the projector will light amber.
2 Press the power button
The power light will start blinking green.
3 Wait for the lamp to warm up
After a few seconds, the power light will stop blinking and stay green . It can take a minute for the lamp to reach full
brightness.
Warning: Do not look directly into the lens when the projector is turned on.
5
6
Turn on the computer
or other source
Got a laptop? You may need to enable its external video port
On most laptops, hold down the Fn key and press the function key labeled CRT/LCD, LCD/VGA, , or similar.
Apple F7 | Gateway Fn+F3 or Fn+F4 | ThinkPad Fn+F7 |
Dell Fn+F8 | HP/Compaq Fn+F4 or Fn+F6 | Toshiba Fn+F5 |
Fujitsu Fn+F10 | Sony Fn+F7 |
|
Key combos for more laptops at www.infocus.com/support
Show the picture
If the picture isn’t visible, keep pressing the source/select button until you see it. Wait a few seconds between each press.
i | If there’s still no picture: Restart your computer. |
See Troubleshooting for more help. |