Using the menus
1 Press menu, then press 
or 
to review menus.
2 Press select to enter a menu, then press 
or 
to review settings.
3Press select to change a setting. If this shows more choices, press 
or 
to update the setting, then press select or menu to save it.
4Press menu to go back. Press it again to remove the menu.
Note: Most picture settings are disabled (gray) unless a source is being displayed.
Controlling your presentations
Connect the USB cable between the projector and your computer (see step 3 ), then press 
and 
to move through your presentation slides.
Note: Most picture settings are disabled (gray) unless a source is being displayed.
6 | Use LitePort Source |
(IN2114 and IN2116 only) |
View photos from a USB flash drive
Copy JPEG pictures to a USB flash drive, then plug the drive into the projector’s LitePort connector. The slideshow starts automatically. Press arrow keys to change slides, press select to see thumbnails and change folders, press select again to return to the slideshow.
7 Turn off the projector
Press the power button
The power light on the projector will blink while the fan cools the lamp. If you need to unplug the projector, wait until the fan stops and the power light stops blinking and stays on.
Note: While the power light is blinking, button presses on the projector and remote are ignored.
(READ THE REFERENCE GUIDE)
Download it at www.infocus.com/support
The Reference Guide is available in multiple languages. It covers advanced setup and operation, including instructions for LAN/network functions (IN2114 & IN2116 only) and lamp replacement.
