Date/Time Settings
Item | Description |
|
|
|
|
Current Date | Configures the current date in Year/Month/Day format. |
|
|
Current Time | Configures the current time in Hour:Minute:Second format. |
|
|
Daylight Savings Time | Click the [ON] check box to enable daylight savings time and set the following items. |
Configures the date and time daylight savings time begins/ends. | |
Month/week/day/hour/minute | Configures the month daylight savings time begins (1~12)/the week of the month (First, |
| 2,3,4,Last)/the day |
|
|
Time difference | Configures the time difference from GMT (hours:minutes). Set the same time difference as the |
| one set on your PC. If unsure, consult your network administrator. |
|
|
SNTP | Click the [ON] check box to retrieve Date and Time information from the SNTP server and set |
| the following items. |
SNTP Server IP Address | Configures the SNTP server address in IP format. Consult with your network administrator to |
| get the IP address of your SNTP (time/date) server. |
Cycle | Configures the interval at which to retrieve Date and Time information from the SNTP server. |
| (hours:minutes). |
|
|
Click the [Apply] button to save the settings.
NOTE:
The new configuration settings are activated after restarting the network connection. The network connection must be restarted when the configuration settings are changed, The network connection can be restarted using [Network Restart] on the main menu.
•If you connect the projector to an existing network, consult a network administrator before setting server addresses.
•To enable the SNTP function, the time difference must be set. SNTP servers report time in Greenwich mean time (GMT)/Universal time; the time difference describes how many hours to add/subtract to get your local time.
•The projector will retrieve DATE and TIME information from the Timeserver and override time settings when SNTP is enabled.
11
