Projector management via SNMP
NOTE:
•It is recommended that SNMP functions be carried out by a network administrator.
•SNMP management software must be installed on the computer to monitor the projector via SNMP.
SNMP Settings
Configure the following items via a web browser to use SNMP.
Example: If the IP address of the projector is set to 192.168.1.10:
6Enter [http://192.168.1.10] into the address bar of the web browser.
7Enter the Administrator ID and Password and click [Logon].
8Click [Security Settings] on the main menu.
9Click [SNMP] and set the Community Name on the screen that is displayed.
Click the [Apply] button to save the settings.
NOTE:
•A Network Restart is required after the Community Name has been changed.
•Click [Network Restart] and configure the items.
•Make sure SNMP sysLocation and SNMP sysContact in the Network Settings page are defined.
17
