Adjusting the Projector
To focus the image, press the Zoom/Focus button on the remote or keypad. “Focus” appears on the screen. Press the adjacent “+” or
The projector is equipped with
To raise the projector:
1Press and hold the elevator buttons (Figure 11).
2Raise the projector to the height you want, then release the buttons to lock the elevator feet into position.
3If necessary, rotate the feet to adjust the angle of the projected image.
NOTE: Focus and zoom adjust- ments are available while in nor- mal mode only. They are not available in PinP or Expand modes.
elevator button
elevator foot
FIGURE 11
Adjusting the height of the projector
15