InFocus LP 840, LP 850 manual Positioning the projector, bottom of image, 50% below lens, center

Models: LP 840 LP 850

1 59
Download 59 pages 14.37 Kb
Page 7
Image 7
Positioning the projector

Positioning the projector

To determine where to position the projector, consider the size and shape of your screen, the location of your power outlets, and the distance between the projector and the rest of your equipment. Here are some general guide- lines:

Position the projector on a flat surface at a right angle to the screen. The projector (with the standard lens) must be at least 3 feet (0.9m) from the projection screen.

Position the projector within 10 feet (3m) of your power source and within 6 feet (1.8m) of your video device (unless you purchase exten- sion cables). To ensure adequate cable access, do not place the projector within 6 inches (.15m) of a wall or other object.

If you are installing the projector on the ceiling, refer to the installation guide that comes with the Ceiling Mount Kit for more information. To turn the image upside down, see “Ceiling” on page 35. We recom- mends using an authorized ceiling mount. The Ceiling Mount Kit is sold separately; see the Accessories catalog that came with this projec- tor or visit our website for more information.

Position the projector the desired distance from the screen. The distance from the lens of the projector to the screen, the zoom setting, and the video format determine the size of the projected image. For information about image sizes at different distances, see “Projected image size” on page 43.

For the standard lens that comes with the projector, the image exits at a given angle. However, the lens shift feature makes the image offset variable. The image offset is 100% at a 10:0 ratio when the projector is in 4:3 mode (default mode). This means that if you have an image 10’ high, all 10’ will appear above the center of the lens.

This image offset is 50% when the lens shift is at a 1:1 ratio. This means that if you have an image 10’ high, the bottom of the image will be 5’ below the center of the lens.

For information about the optional lenses image offsets, see “Projected image size” on page 43.

10 ft high image

10:0 bottom of image 100% above lens center

1:0

 

bottom of image

lens center

50% below lens

 

center

 

Projection angle in 4:3 mode (default)

10:0

1:1

7

Page 7
Image 7
InFocus LP 840, LP 850 Positioning the projector, ft high image 100 bottom of image 100% above lens center, 50% below lens